IS 250 2jz swap information
#1
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: fl
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
IS 250 2jz swap information
hey guys, fiirst time on CL but was an avid supraforums member for a long time, and a mod on clubna-t back in the day. I am in the process of picking up a 2008 is250 and was wondering a few things about a 2jz swap. first off let me ask to keep your negative comments about not doing it to yourself as every thread i saw were people just shutting down others but not giving facts of why. so I have a few questions and any real life answers will be appreciated.
1.) are there any fitment problems? motor mounts the same?
2.) i know the electronics are a problem, but what if i use the stock ECU and piggy back a mega squirt or something else? (and i dont mind if i have to take out some dash lights to make it work)
3.) will the stock tranny bolt up to a 2jz?
4.) how much power can the stock auto handle (I would increase the line pressure for stronger shifts)? stock manual?
5.) what are the other main problems people run into?
Thanks in advance, if all goes well i will take tons of pics and do a nice write up like i used to do for my supras
1.) are there any fitment problems? motor mounts the same?
2.) i know the electronics are a problem, but what if i use the stock ECU and piggy back a mega squirt or something else? (and i dont mind if i have to take out some dash lights to make it work)
3.) will the stock tranny bolt up to a 2jz?
4.) how much power can the stock auto handle (I would increase the line pressure for stronger shifts)? stock manual?
5.) what are the other main problems people run into?
Thanks in advance, if all goes well i will take tons of pics and do a nice write up like i used to do for my supras
#2
Pole Position
iTrader: (5)
Get in touch with the only guy in the US that is known to have successfully done this. Most answers you'd find from the vast majority here I'd consider hear-say.
Here's a link the "THE-IS" 's thread on my.is who did the swap, i dont think he ever registered or posted on club lexus about the swap.
http://my.is/forums/f156/is250-2jz-v...runnin-418446/
Here's a link the "THE-IS" 's thread on my.is who did the swap, i dont think he ever registered or posted on club lexus about the swap.
http://my.is/forums/f156/is250-2jz-v...runnin-418446/
#3
Lexus Champion
iTrader: (17)
There is only 1 person on this forum who successfully swapped a 2JZ into a 250. He does engine swaps for a living and would charge 30K just for the labor.
Long story short, its not worth modding the 250 for power, just buy a 350 or ISF. These arent tunner friendly cars.
Long story short, its not worth modding the 250 for power, just buy a 350 or ISF. These arent tunner friendly cars.
#4
Lexus Fanatic
iTrader: (1)
Get in touch with the only guy in the US that is known to have successfully done this. Most answers you'd find from the vast majority here I'd consider hear-say.
Here's a link the "THE-IS" 's thread on my.is who did the swap, i dont think he ever registered or posted on club lexus about the swap.
http://my.is/forums/f156/is250-2jz-v...runnin-418446/
Here's a link the "THE-IS" 's thread on my.is who did the swap, i dont think he ever registered or posted on club lexus about the swap.
http://my.is/forums/f156/is250-2jz-v...runnin-418446/
Be aware the guy who did that swap, who does lexus/toyota engine swaps for a living, said it's somewhere around 300 hours of labor to get it to work (on a base model, so longer if you want anything fancy like the body ecu stuff or nav to work... he got everything on the base to work except VSC which ain't happening)
As to your questions- from that thread
"EVERTHING IS CUSTOM. Only thing he can recall not modifying, is the lower radiator hose, which was from a mk4 supra"
He swapped the entire powertrain- motor and transmission and ECU and wiring harness... I suspect you'd need to as well.
The main problem people run into is unless their time isn't worth anything to them the swap isn't really worth doing compared to just buying an IS-F instead of an IS250...l I've seen 3 people ever post about trying it in the US.... one is the guy who did it linked above... the other 2 had north of 50k into it at a shop and never ended up with a fully working car.
Sadly Lance (the guy who did the one working one) did not document his work so there's no wiring diagrams to use to improve that build time any.... if you decide you're gonna do it anyway, DOCUMENT it... I suspect you could sell a pre-made wiring harness for a decent bit of money.
Last edited by Kurtz; 11-28-12 at 12:06 PM.
Trending Topics
#12
Lexus Test Driver
You should consider the 3UZFE swap. It appears that if you can find a donor engine and ecu of the same year or newer, it could be a direct plug and play deal. I've already confirmed the motor mounts and trans mounts for the 2GR are the EXACT motor mounts for the 3UZ.
#13
Driver School Candidate
Thread Starter
Join Date: Nov 2012
Location: fl
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
ok guys, I dont see where 30K is coming from? i can pull a motor in 3-4 hours if its one i haven't done already, is there any fitment issues? and is it possible to piggy back the two ecu's to make everything work without caring about the dash lights. I was a budget build moderator on clubna-t and was great at figuring things out to save money and still get them working properly. I am not going to pay anyone, my cousin is a master tech for toyota and is going to help if i do it, and we can weld almost anything we have to like motor mounts if needed. I was looking for help and real facts not what a shop would charge and telling me to buy an ISF.
#15
Pole Position
iTrader: (5)
ok guys, I dont see where 30K is coming from? i can pull a motor in 3-4 hours if its one i haven't done already, is there any fitment issues? and is it possible to piggy back the two ecu's to make everything work without caring about the dash lights. I was a budget build moderator on clubna-t and was great at figuring things out to save money and still get them working properly. I am not going to pay anyone, my cousin is a master tech for toyota and is going to help if i do it, and we can weld almost anything we have to like motor mounts if needed. I was looking for help and real facts not what a shop would charge and telling me to buy an ISF.
"Its a complete Aristo V300 Swap Engine, trans, wiring harness, and ecu i think
VSC doesnt work but who cares. Except for the dash prompt "check vsc" I guess its a minor trade off considering the potential that can be unleashed.
ABS works fine toyota wouldnt disable abs if vsc stopped working (lawsuit, like they need another nightmare to deal with)
EPS works didnt need to swap racks
Smart key works its all original
AFS and HIDs no problem
Car is still DBW its like the gen 1 IS uses a cable."
I still recommend you get on my.is and PM "Toyomoto" who did the swap or "THE-IS" who is his son. They would likely be the only one who have 100% answers and not speculation, aside from Kurtz who I see followed the threads on My.IS. Kurtz is more knowledgeable than most any about this type of thing, I'd say.