IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

mark levinson amp output wattages per channel

Thread Tools
 
Search this Thread
 
Old 01-05-13 | 01:11 PM
  #1  
fng's Avatar
fng
Thread Starter
Driver School Candidate
 
Joined: Dec 2012
Posts: 48
Likes: 1
From: CA
Default mark levinson amp output wattages per channel

Anyone know the mark levinson amp output wattages per channel? Specifically the subwoofer?

2006 IS 350
Old 01-05-13 | 02:37 PM
  #2  
jsmacks's Avatar
jsmacks
Lead Lap
 
Joined: Oct 2012
Posts: 460
Likes: 4
From: Kailua, HI
Default

Not enough.
Old 01-05-13 | 03:05 PM
  #3  
Jeff Lange's Avatar
Jeff Lange
Keeping it Real
iTrader: (1)
 
Joined: Apr 2009
Posts: 5,040
Likes: 614
From: California
Default

About the only information I have seems to be for the speakers themselves. I'm not 100% sure on the amp's output.

2006-09 Mark Levinson has:

14 Speakers: (8Ω for all Drivers)
1 center channel on the dash.
25W 2.6in Speaker
3 speakers in each front door.
20W 1.0in Tweeter, 25W 2.6in Midrange, 25W 6.5in Woofer
2 speakers in each rear door.
20W 1.0in Tweeter, 25W 4.0in Midrange
2 surround rear speakers on the back deck.
25W 2.6in Speakers
1 sub-woofer in the trunk
40W 8.0in Sub-Woofer
Pioneer Head Unit, Mark Levinson Amplifier


2010-12 Mark Levinson has:

14 Speakers: (6Ω for all Drivers)
1 center channel on the dash.
15W 2.6in Speaker
3 speakers in each front door.
20W 1.0in Tweeter, 15W 2.6in Midrange, 25W 6.5in Woofer
2 speakers in each rear door.
20W 1.0in Tweeter, 30W 4.0in Midrange
2 surround rear speakers on the back deck.
15W 2.6in Speakers
1 sub-woofer in the trunk.
50W 8.0in Sub-Woofer
Pioneer Head Unit, Mark Levinson Amplifier

Jeff
The following users liked this post:
FlyingCGuy (07-25-23)
Old 01-05-13 | 06:02 PM
  #4  
Gville350's Avatar
Gville350
Moderator
iTrader: (10)
 
Joined: Mar 2011
Posts: 11,576
Likes: 436
From: South Carolina
Default

Which channel specifically do you need to know about?
Old 01-06-13 | 08:52 AM
  #5  
fng's Avatar
fng
Thread Starter
Driver School Candidate
 
Joined: Dec 2012
Posts: 48
Likes: 1
From: CA
Default

Originally Posted by Jeff Lange
About the only information I have seems to be for the speakers themselves. I'm not 100% sure on the amp's output.

2006-09 Mark Levinson has:

14 Speakers: (8Ω for all Drivers)
1 center channel on the dash.
25W 2.6in Speaker
3 speakers in each front door.
20W 1.0in Tweeter, 25W 2.6in Midrange, 25W 6.5in Woofer
2 speakers in each rear door.
20W 1.0in Tweeter, 25W 4.0in Midrange
2 surround rear speakers on the back deck.
25W 2.6in Speakers
1 sub-woofer in the trunk
40W 8.0in Sub-Woofer
Pioneer Head Unit, Mark Levinson Amplifier


2010-12 Mark Levinson has:

14 Speakers: (6Ω for all Drivers)
1 center channel on the dash.
15W 2.6in Speaker
3 speakers in each front door.
20W 1.0in Tweeter, 15W 2.6in Midrange, 25W 6.5in Woofer
2 speakers in each rear door.
20W 1.0in Tweeter, 30W 4.0in Midrange
2 surround rear speakers on the back deck.
15W 2.6in Speakers
1 sub-woofer in the trunk.
50W 8.0in Sub-Woofer
Pioneer Head Unit, Mark Levinson Amplifier

Jeff
Thanks, but wait a second here. Every other thread on this site says that the Subwoofer is a 12Ω driver. Are you sure you're not mistaken?

Originally Posted by Gville350
Which channel specifically do you need to know about?
Subwoofer. I'm going to need to replace it and I'm exploring my options. Thanks
Old 01-06-13 | 09:17 AM
  #6  
Jake's Avatar
Jake
Lead Lap
 
Joined: May 2012
Posts: 467
Likes: 1
From: Texas
Default

Instead of replacing it, SimplySpeakers.com repairs them. I sent mine off a few months ago, took two weeks, paid $45, and it's good as new!
Old 01-06-13 | 09:37 AM
  #7  
Jeff Lange's Avatar
Jeff Lange
Keeping it Real
iTrader: (1)
 
Joined: Apr 2009
Posts: 5,040
Likes: 614
From: California
Default

Originally Posted by fng
Thanks, but wait a second here. Every other thread on this site says that the Subwoofer is a 12Ω driver. Are you sure you're not mistaken?
It's what Lexus lists them as in several NCF publications, unless those publications are wrong.

mark levinson amp output wattages per channel-5zn8w.png
(Source: 2006 IS250/350 NCF Book Publication No. NM0140U, Page MO-13)

mark levinson amp output wattages per channel-ptpuf.png
(Source: 2010 IS250/350 NCF Book Publication No. NM13U0U, Page 11)

Jeff
Old 01-06-13 | 09:51 AM
  #8  
vapid2323's Avatar
vapid2323
Pole Position
 
Joined: Jun 2012
Posts: 373
Likes: 0
From: WA
Default

Originally Posted by jakers95
Instead of replacing it, SimplySpeakers.com repairs them. I sent mine off a few months ago, took two weeks, paid $45, and it's good as new!

HELL yes, all the local places I asked wont repair this driver! You rock.
Old 01-06-13 | 10:10 AM
  #9  
fng's Avatar
fng
Thread Starter
Driver School Candidate
 
Joined: Dec 2012
Posts: 48
Likes: 1
From: CA
Default

Originally Posted by jakers95
Instead of replacing it, SimplySpeakers.com repairs them. I sent mine off a few months ago, took two weeks, paid $45, and it's good as new!
Thanks, I would rather replace it if I could, just to save the down time but if not I will probably go your route. Did everything work fine without the subwoofer while it was out for repair?


Originally Posted by Jeff Lange
It's what Lexus lists them as in several NCF publications, unless those publications are wrong.


(Source: 2006 IS250/350 NCF Book Publication No. NM0140U, Page MO-13)


(Source: 2010 IS250/350 NCF Book Publication No. NM13U0U, Page 11)

Jeff
Is that for US models? Why does everyone think it's 12-ohm?
Old 01-06-13 | 10:21 AM
  #10  
Jeff Lange's Avatar
Jeff Lange
Keeping it Real
iTrader: (1)
 
Joined: Apr 2009
Posts: 5,040
Likes: 614
From: California
Default

That is for USA and Canada models. I'm not sure why people think it's 12Ω? Where did you hear/read that?

EDIT: I looked up other countries and they used the same subwoofer as we did, globally.

Jeff

Last edited by Jeff Lange; 01-06-13 at 10:49 AM.
Old 01-06-13 | 10:37 AM
  #11  
Kurtz's Avatar
Kurtz
Lexus Fanatic
iTrader: (1)
 
Joined: Aug 2007
Posts: 7,810
Likes: 14
From: NC
Default

Originally Posted by fng
Thanks, I would rather replace it if I could, just to save the down time but if not I will probably go your route. Did everything work fine without the subwoofer while it was out for repair?


Is that for US models? Why does everyone think it's 12-ohm?
Who is everyone?

I've known the 06-09 speakers were 8 Ohm for years, and have posted exactly that any number of times in threads about em.
Old 01-06-13 | 11:16 AM
  #12  
fng's Avatar
fng
Thread Starter
Driver School Candidate
 
Joined: Dec 2012
Posts: 48
Likes: 1
From: CA
Default

Originally Posted by Jeff Lange
That is for USA and Canada models. I'm not sure why people think it's 12Ω? Where did you hear/read that?

EDIT: I looked up other countries and they used the same subwoofer as we did, globally.

Jeff
Thanks. Well, if it's an 8-ohm then it will be cheap and easy to replace.


Originally Posted by Kurtz
Who is everyone?

I've known the 06-09 speakers were 8 Ohm for years, and have posted exactly that any number of times in threads about em.
I cant seem to find the thread now but I'm certain that I read it in 2 different threads and no one contested the fact that it was a 12-ohm. Like I said, if it is an 8-ohm then that is great.
Old 01-06-13 | 02:54 PM
  #13  
Jake's Avatar
Jake
Lead Lap
 
Joined: May 2012
Posts: 467
Likes: 1
From: Texas
Default

Originally Posted by vapid2323
HELL yes, all the local places I asked wont repair this driver! You rock.
Thanks! Just follow the directions online, and send it to them. They will look over everything and tell you what needs to be replaced when they get it. It comes with a one year warranty too.
Old 01-06-13 | 06:25 PM
  #14  
Gville350's Avatar
Gville350
Moderator
iTrader: (10)
 
Joined: Mar 2011
Posts: 11,576
Likes: 436
From: South Carolina
Default

While on the subject of the ML sub. what specifically fails on these things for them to "blow"? Has anyone thought about replacing an ML sub with a non-ML sub?
Old 01-07-13 | 07:35 AM
  #15  
vapid2323's Avatar
vapid2323
Pole Position
 
Joined: Jun 2012
Posts: 373
Likes: 0
From: WA
Default

Originally Posted by Gville350
While on the subject of the ML sub. what specifically fails on these things for them to "blow"? Has anyone thought about replacing an ML sub with a non-ML sub?
People do all the time, some I believe even put a replacement where the stock one was. But most will just add in a sub box and amp of there own. I am just over that whole sub woofer phase, IMO its not really needed in this car, I am happy with a stock system.


Quick Reply: mark levinson amp output wattages per channel



All times are GMT -7. The time now is 11:28 PM.