Fog lights
03-23-13, 10:03 PM
#4
I ordered Putco Jet Yellow 3000k fog lights from Amazon be sure to look for the 9006 fitment bulbs, as those are the types of fog lights that fit on our specific car's fog light housing. They aren't that difficult to do; there is a DIY on the FAQ sticky that does one through a little flap and pulling the fender liner. However, I decided to pull the fender liners on both sides to make it easier to take out and put in the bulbs without touching them on anything. Literally can do the whole job with a philips screwdriver.
This is the only good pic I have that shows how yellow these bulbs are.
This is the only good pic I have that shows how yellow these bulbs are.
03-23-13, 10:19 PM
#5
Driver School Candidate
Join Date: Jan 2013
Location: PA
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
I went the DDM tuning route. What you should know:
People have serious problems with these people cause they send out the wrong color bulbs apparently.
Lifetime Warranty? sure, but good luck getting a hold of these people.
That said, I've have them installed for a a month or so and no problems. Half the price or more fo competitors.
People have serious problems with these people cause they send out the wrong color bulbs apparently.
Lifetime Warranty? sure, but good luck getting a hold of these people.
That said, I've have them installed for a a month or so and no problems. Half the price or more fo competitors.
03-23-13, 11:54 PM
#6
www.ddmtuning.com I've had mine installed for about 2 months now and have no problems. I had yellow tinted halogen bulbs before that, and it just wasnt yellow enough for me.
03-24-13, 01:09 AM
#7
Pole Position
iTrader: (1)
Join Date: Mar 2006
Location: ca
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Yes. I have a problem with DDM. Ballast went out in 2 years. The money saved on half price is not worth the time to replace the kit. I am looking to try TRS morimoto kit.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post