Pic of your 2IS - RIGHT NOW ! take 2
02-21-24, 05:17 PM
#7321
The gloss obsession continues:
Ceramic coated with the combo of:
Gyeon Q2 Pure Evo &,
Gyeon Q2 CanCoat
* Topped with P&S 'Clean Maker' 10:1 ratio of Bead Maker + Dream Maker
* Windows coated with CarPro Flyby30
* Wheels coated and polished with Chemcial Guys Wheel Guard Max Coat Rim & Wheel Sealant
* Tires coated with Fireball SIO2 tire dressing. I love the glazed donut look
Ceramic coated with the combo of:
Gyeon Q2 Pure Evo &,
Gyeon Q2 CanCoat
* Topped with P&S 'Clean Maker' 10:1 ratio of Bead Maker + Dream Maker
* Windows coated with CarPro Flyby30
* Wheels coated and polished with Chemcial Guys Wheel Guard Max Coat Rim & Wheel Sealant
* Tires coated with Fireball SIO2 tire dressing. I love the glazed donut look
The following users liked this post:
istarzan (06-20-24)
The following 2 users liked this post by Ken167:
is250sage2007 (03-04-24),
NYIS300awdFS (04-01-24)
The following users liked this post:
is250sage2007 (04-12-24)
05-20-24, 07:29 AM
#7326
Driver School Candidate
Arrived today. Photos soon.
I am just on the way to the shop to buy some high temp grease to place on the wheel rotors and lugs before fitting the wheel.
Let's pray it doesn't rub.
The wheel is:
Ström DS-25.
9x35/245/R18 front
9.5x35/265/R18 rear
I might have to raise the car a little. And might need to change the rear tyres. Hopefully not.
I am just on the way to the shop to buy some high temp grease to place on the wheel rotors and lugs before fitting the wheel.
Let's pray it doesn't rub.
The wheel is:
Ström DS-25.
9x35/245/R18 front
9.5x35/265/R18 rear
I might have to raise the car a little. And might need to change the rear tyres. Hopefully not.
05-20-24, 05:05 PM
#7327
Driver School Candidate
Arrived today. Photos soon.
I am just on the way to the shop to buy some high temp grease to place on the wheel rotors and lugs before fitting the wheel.
Let's pray it doesn't rub.
The wheel is:
Ström DS-25.
9x35/245/R18 front
9.5x35/265/R18 rear
I might have to raise the car a little. And might need to change the rear tyres. Hopefully not.
I am just on the way to the shop to buy some high temp grease to place on the wheel rotors and lugs before fitting the wheel.
Let's pray it doesn't rub.
The wheel is:
Ström DS-25.
9x35/245/R18 front
9.5x35/265/R18 rear
I might have to raise the car a little. And might need to change the rear tyres. Hopefully not.
As promised. Now it needs a tyre shine.
is250_sage_and_meetz
The following users liked this post:
sede7 (05-20-24)
The following 2 users liked this post by Ken167:
is250sage2007 (06-20-24),
istarzan (06-20-24)
