Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Interior
- Why is My Check Engine Light On?
Guide to diagnose trouble and recommended solutions
Browse all: Interior
Check Engine light with Vsc and trc control light on
#17
Rookie
Thread Starter
iTrader: (7)
Join Date: Dec 2011
Location: California
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all input! ill probably by a new gas cap just in case. Well i took it to a mechanic and they just did exactly what I did at pepboys except cleared the code and tighten the gas cap -.-. Waste of time.... LOL but so far the check engine light and vsc light and trc light hasn't come on.
But a black cat ran across my path today while i was driving so idk...
Will keep you guys updated
But a black cat ran across my path today while i was driving so idk...
Will keep you guys updated
#18
Driver School Candidate
Join Date: Feb 2014
Location: CA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2006 is250. Mode F Sport exhaust and F sport intake. Just got the pistol and water pump replace due to code engine misfilre. Replace by lexus in May 2013. So far no issue but I started notice the Check Engine light with Vsc and trc control light on often a lot now. It would turn off for one day and show back up.
Remove the battery positive charge and it disappeared but show up the next day.
Remove the battery positive charge and it disappeared but show up the next day.
#20
Rookie
Thread Starter
iTrader: (7)
Join Date: Dec 2011
Location: California
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys for all the input! All I did was replace maf sensor and the CEL disappeared, but just recently I received a p2757 error code. Which is the Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance or Stuck Off.
So do you guys think flushing transmission fluid and cleaning the solenoids/torque converter will help? Or am I still going to accumulate metal flakes regardless....
So do you guys think flushing transmission fluid and cleaning the solenoids/torque converter will help? Or am I still going to accumulate metal flakes regardless....
#21
Driver School Candidate
Thanks guys for all the input! All I did was replace maf sensor and the CEL disappeared, but just recently I received a p2757 error code. Which is the Torque Converter Clutch Pressure Control Solenoid Control Circuit Performance or Stuck Off.
So do you guys think flushing transmission fluid and cleaning the solenoids/torque converter will help? Or am I still going to accumulate metal flakes regardless....
So do you guys think flushing transmission fluid and cleaning the solenoids/torque converter will help? Or am I still going to accumulate metal flakes regardless....
#22
I have same thing going on as well rwd is250, just had transmission fluid replaced from the pan and a new gasket, pan cleaned, and new transmission filter installed. 2757 comes up, The dealership says $220 for the part geesh!!!! Has anyone replaced this? If so where did you buy it from and how much was it? Part number 35290-34010
Thread
Thread Starter
Forum
Replies
Last Post
oscar55773
IS - 2nd Gen (2006-2013)
3
01-17-17 03:24 PM
kaliboy562
IS - 2nd Gen (2006-2013)
4
03-25-14 05:14 PM
nch2oracer
IS - 2nd Gen (2006-2013)
18
05-11-10 01:37 PM