AFS Lever Sensor Arm snapped in half.
#1
Driver School Candidate
Thread Starter
Join Date: Apr 2012
Location: Ontario
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I took my car to a mechanic due to the AFS light indicating that it's OFF. It seems that the AFS Lever Sensor Arm has snapped in half ![Frown](https://www.clublexus.com/forums/images/smilies/frown.gif)
So I've attached the damage below. Would anyone know where I can get this part?
Lexus IS250 AWD 2007
Thank you in advance.
![Frown](https://www.clublexus.com/forums/images/smilies/frown.gif)
So I've attached the damage below. Would anyone know where I can get this part?
Lexus IS250 AWD 2007
Thank you in advance.
#2
Instructor
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
local junk yard...
#3
Driver School Candidate
Thread Starter
Join Date: Apr 2012
Location: Ontario
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#5
Driver School Candidate
Join Date: Dec 2013
Location: ont
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Can you maybe make one?
2 of these
http://www.mcmaster.com/#6275k54/=r7nk55
1 of these and a hacksaw
http://www.mcmaster.com/#99067a248/=r7nmta
note: these are 8mm ball joints in the link above. you may need to go up to 10mm or down to 6mm depending how big this lever is. It is a little hard to tell in your picture.
Good Luck!
2 of these
http://www.mcmaster.com/#6275k54/=r7nk55
1 of these and a hacksaw
http://www.mcmaster.com/#99067a248/=r7nmta
note: these are 8mm ball joints in the link above. you may need to go up to 10mm or down to 6mm depending how big this lever is. It is a little hard to tell in your picture.
Good Luck!
#6
Driver School Candidate
Thread Starter
Join Date: Apr 2012
Location: Ontario
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Wow, so expensive ![Crying](https://www.clublexus.com/forums/images/smilies/Peace.gif)
But thank you for pointing me towards the right part number. Now I can know how to call the part!
This might actually work! I will definitely will try this if gluing does not help. Thank you so much.
![Crying](https://www.clublexus.com/forums/images/smilies/Peace.gif)
But thank you for pointing me towards the right part number. Now I can know how to call the part!
Can you maybe make one?
2 of these
http://www.mcmaster.com/#6275k54/=r7nk55
1 of these and a hacksaw
http://www.mcmaster.com/#99067a248/=r7nmta
note: these are 8mm ball joints in the link above. you may need to go up to 10mm or down to 6mm depending how big this lever is. It is a little hard to tell in your picture.
Good Luck!
2 of these
http://www.mcmaster.com/#6275k54/=r7nk55
1 of these and a hacksaw
http://www.mcmaster.com/#99067a248/=r7nmta
note: these are 8mm ball joints in the link above. you may need to go up to 10mm or down to 6mm depending how big this lever is. It is a little hard to tell in your picture.
Good Luck!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post