DIY cardboard front splitter
#1
Thread Starter
Moderator
iTrader: (10)
Joined: Mar 2011
Posts: 11,576
Likes: 436
From: South Carolina
DIY cardboard front splitter
Of course this was completely for fun, but to also get me some ideas of what measurements I might need to look at when it comes time to get a CF splitter. Yes, I'm seriously considering getting one, but definitely won't be this aggressive since I DD this Lex. This reminds me of the Top Gear episode when they installed a plywood splitter on a Renault Avantime. Short-lived though! LOL!
Measurements below were based off of the bottom-most portion of a OEM '06 bumper cover :
Width - 65"
Middle height - 15.25"
Qtr height - 12.5"
Enjoy!
Measurements below were based off of the bottom-most portion of a OEM '06 bumper cover :
Width - 65"
Middle height - 15.25"
Qtr height - 12.5"
Enjoy!
Trending Topics
#8
Thread Starter
Moderator
iTrader: (10)
Joined: Mar 2011
Posts: 11,576
Likes: 436
From: South Carolina
Since there's not a single thing out for the 2IS, it will either be one of two things :
1) managing a universal splitter with similar dimensions to fit it
2) send measurements in to have one made to spec, as shown here : http://www.aprperformance.com/index....sk=view&id=250
But it was fun just to visualize it, even if it was just cardboard.
1) managing a universal splitter with similar dimensions to fit it
2) send measurements in to have one made to spec, as shown here : http://www.aprperformance.com/index....sk=view&id=250
But it was fun just to visualize it, even if it was just cardboard.
Thread
Thread Starter
Forum
Replies
Last Post
Newchapter
GS - 2nd Gen (1998-2005)
11
03-28-10 12:23 PM