IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

2010 IS350 Roof Spoiler install questions

Thread Tools
 
Search this Thread
 
Old 08-08-15, 05:14 PM
  #16  
SeanO
Instructor
Thread Starter
iTrader: (1)
 
SeanO's Avatar
 
Join Date: Feb 2013
Location: Ontario, Canada
Posts: 921
Received 42 Likes on 39 Posts
Default



Just finished putting the roof spoiler on with a friend from work. He let me drive his 08' 4.6L V8 Hyundai Genesis today what a beast that car is!! Anyways I'm gonna leave the cases on it overnight and I also taped down both edges good and tight. I'll post another pic tomorrow when I remove the cases and tape. I used alcohol and adhesive promoter so I'm thinkin its gonna be on there good!!
Old 08-10-15, 01:37 PM
  #17  
SeanO
Instructor
Thread Starter
iTrader: (1)
 
SeanO's Avatar
 
Join Date: Feb 2013
Location: Ontario, Canada
Posts: 921
Received 42 Likes on 39 Posts
Default

It rained all day today I was at work clenching my teeth hoping it wouldn't fly off on the way home or start popping up or anything. I looked at it when i got home and it almost looks like the back left side of the spoiler (not the corner) isn't sitting properly on the window.. I can push it down and watch the 2 way tape compress a bit which really pisses me off... Its probably 6-8 inches in from the back left corner of the spoiler if your lookin down from above.. Gonna keep an eye on it over the course of the week but if i see it get any worse its comin off and I'm gonna silicone the **** out of it and slap it on there for good. I don't ever plan on removing it so if this tape don't hold up it's gettin siliconed. Seems like that is the only spot where i don't have good ahdesion.. seems like a weird spot for it not to stick either.. Again its veeeerrrrryyyyy small but it'll only get worse I imagine.. If you grab the spoiler and try to move it though.. you can't.. So I'm gonna monitor it and go from there..

Last edited by SeanO; 08-10-15 at 01:52 PM. Reason: Editing
Old 08-10-15, 01:59 PM
  #18  
CreativeS
Driver School Candidate
 
CreativeS's Avatar
 
Join Date: Dec 2014
Location: Toronto
Posts: 24
Received 0 Likes on 0 Posts
Default

Can you post a pic? I think you should fill the silicone. (I did mine from one corner bottom right.)

Originally Posted by SeanO
It rained all day today I was at work clenching my teeth hoping it wouldn't fly off on the way home or start popping up or anything. I looked at it when i got home and it almost looks like the back left side of the spoiler (not the corner) isn't sitting properly on the window.. I can push it down and watch the 2 way tape compress a bit which really pisses me off... Its probably 6-8 inches in from the back left corner of the spoiler if your lookin down from above.. Gonna keep an eye on it over the course of the week but if i see it get any worse its comin off and I'm gonna silicone the **** out of it and slap it on there for good. I don't ever plan on removing it so if this tape don't hold up it's gettin siliconed. Seems like that is the only spot where i don't have good ahdesion.. seems like a weird spot for it not to stick either.. Again its veeeerrrrryyyyy small but it'll only get worse I imagine.. If you grab the spoiler and try to move it though.. you can't.. So I'm gonna monitor it and go from there..
Old 08-10-15, 02:03 PM
  #19  
SeanO
Instructor
Thread Starter
iTrader: (1)
 
SeanO's Avatar
 
Join Date: Feb 2013
Location: Ontario, Canada
Posts: 921
Received 42 Likes on 39 Posts
Default

It's so small it will be tough to get a good picture.. I'll try though.. I might have to do that.. get some black silicone and seal it off..
Old 08-10-15, 02:15 PM
  #20  
SeanO
Instructor
Thread Starter
iTrader: (1)
 
SeanO's Avatar
 
Join Date: Feb 2013
Location: Ontario, Canada
Posts: 921
Received 42 Likes on 39 Posts
Default



As bad as this pic is.. its as good as I could get it.. you can see 3 small sections of black on the grey tape line this is where its popped up.. I might run to the store and get some silicone as you mentioned CreativeS and hit it in that spot... Like I said the spoiler is solid as a rock..
Old 08-10-15, 04:06 PM
  #21  
SeanO
Instructor
Thread Starter
iTrader: (1)
 
SeanO's Avatar
 
Join Date: Feb 2013
Location: Ontario, Canada
Posts: 921
Received 42 Likes on 39 Posts
Default

Siliconed the area that was popped up a bit.. I'll keep an eye on it from here
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zman86
IS - 2nd Gen (2006-2013)
1
01-19-14 09:22 AM
LeonHuu007
IS - 2nd Gen (2006-2013)
20
03-11-12 09:41 AM
e39ng
GS - 3rd Gen (2006-2011)
6
02-12-10 09:37 PM
kidluvsole
IS - 2nd Gen (2006-2013)
16
10-03-09 01:00 PM
MrMark
IS - 2nd Gen (2006-2013)
29
01-28-08 07:31 AM



Quick Reply: 2010 IS350 Roof Spoiler install questions



All times are GMT -7. The time now is 07:24 PM.