Rear door / quarter panel gap
#1
Driver School Candidate
Thread Starter
Rear door / quarter panel gap
So my is250 has slightly smaller gaps between the door and the wheel well / lower quarter panel, than the door and the upper quarter panel. I'm refrencing the back of the rear doors. Is this normal for these gaps, or should they be absolutely identical all the way down the doors?
#4
Driver School Candidate
Thread Starter
Thanks!
What I figured! Both sides have the exact same issue. Slightly more narrow towards the big curve on the door, where it passes in front of the wheel well. I though maybe it had to do with the shape of the door , and that Lexus did that intentionally. I guess not. Thank you giys!
#5
Lexus Test Driver
iTrader: (2)
What I figured! Both sides have the exact same issue. Slightly more narrow towards the big curve on the door, where it passes in front of the wheel well. I though maybe it had to do with the shape of the door , and that Lexus did that intentionally. I guess not. Thank you giys!
Post picture. Maybe throw something in the narrow gap and move it to the open gap. How much are you talking about?
Thread
Thread Starter
Forum
Replies
Last Post