IS - 2nd Gen (2006-2013) Discussion about the 2006+ model IS models

CEL with 2 codes

Thread Tools
 
Search this Thread
 
Old 02-12-19, 08:23 AM
  #1  
LexStylez
Pole Position
Thread Starter
 
LexStylez's Avatar
 
Join Date: Dec 2010
Location: Canada
Posts: 215
Likes: 0
Received 1 Like on 1 Post
Default CEL with 2 codes

Last year around Fall, my CEL and VSC light came on. I've read that a common issue is the gas cap. I replaced a new one and the lights disappeared after 30 minutes of driving. Three months later the lights came back on but disappeared on the same day. Most recently last week it came back on but disappeared a day later so I decided to buy an OBDII scanner and got a couple codes for P0172 (System Too Rich Bank 1) and P0606 (ECM/PCM Processor). I'm not sure what needs to be fixed. The car drives normal. I hope it's nothing major.

Last edited by LexStylez; 02-12-19 at 08:33 AM.
Old 02-12-19, 11:16 AM
  #2  
Gville350
Moderator
iTrader: (10)
 
Gville350's Avatar
 
Join Date: Mar 2011
Location: South Carolina
Posts: 11,574
Likes: 0
Received 433 Likes on 385 Posts
Default

Sounds like you might need to look into new O2 sensors.
Old 02-12-19, 11:31 AM
  #3  
LexStylez
Pole Position
Thread Starter
 
LexStylez's Avatar
 
Join Date: Dec 2010
Location: Canada
Posts: 215
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Gville350
Sounds like you might need to look into new O2 sensors.
The 2 codes is because of a bad ​​​​​​O2 sensor? Do you know the part number? Is it something that needs to be replaced now? Been driving for about 6 months since the lights first came on and it drives normal. Thanks
Old 02-12-19, 01:07 PM
  #4  
flowrider
Lexus Champion
iTrader: (9)
 
flowrider's Avatar
 
Join Date: Nov 2008
Location: Arizona
Posts: 10,502
Received 1,896 Likes on 1,337 Posts
Default

^^^^Did you try to erase the codes?

Lou
Old 02-12-19, 02:22 PM
  #5  
LexStylez
Pole Position
Thread Starter
 
LexStylez's Avatar
 
Join Date: Dec 2010
Location: Canada
Posts: 215
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by flowrider
^^^^Did you try to erase the codes?

Lou
No I haven't tried to erase the codes.
Old 02-12-19, 05:51 PM
  #6  
flowrider
Lexus Champion
iTrader: (9)
 
flowrider's Avatar
 
Join Date: Nov 2008
Location: Arizona
Posts: 10,502
Received 1,896 Likes on 1,337 Posts
Default

^^^^Well, I would try and see if they come back.

Lou
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KRobbins
Maintenance
0
07-03-18 09:57 AM
DaneGer
RX - 1st Gen (1999-2003)
3
05-10-18 09:47 PM
RXGS
GS - 2nd Gen (1998-2005)
5
04-12-13 04:36 PM
SC2000
RX - 1st Gen (1999-2003)
3
01-07-13 09:00 AM
Gomer1
RX - 1st Gen (1999-2003)
5
02-23-10 06:50 AM



Quick Reply: CEL with 2 codes



All times are GMT -7. The time now is 04:35 PM.