Hey y'all.

Has anyone had any experiences with iJDM toy DRL's or vled DRL's?

I came across two different sets and I was just wondering how reliable both are.

Vled: https://www.vleds.com/shop-applicati...06-6-xte2.html

iJDM Toy: https://store.ijdmtoy.com/products/w...20761068535911

I know aftermarket DRL's tend to flicker, so I was just wondering if anyone has found a good solution for this?

Thanks.

 

I have used iJDMtoy since 2013 or so. I would choose the CREE led drls over the smd style. To prevent the flickering you will have to pair it with a decoder. Be aware that you will loose the high beam function. As to the bulbs will be useless to illuminate ahead. They will still flash though if needed.

As for brands they both been around for some time.

 

I dont think my 07 IS350 is compatible with a COB led drl. And even though iJDM toy says a decoder will not be needed, are they actually telling the truth or will the light still flicker? Do they flicker from your experience?

 

Sorry I meant to say CREE led bulbs.

https://store.ijdmtoy.com/collection...-lights-40-345

You will need the R4 decoder option. Also when in doubt email customer service. They are pretty good on replying back.

Xenon White 80W 9005 CREE LED High Beam Daytime Running Lights Kit


Free Shipping Within 24 Hours.

$29.99 USD

SKU 40-345-White

Top of Form

Option

For Scion FR-S, Early Model Subaru WRX, etc

For Early Model Lexus IS GS ES Mazda 3 6 CX-5, etc

For Acura TL TSX MDX Honda Accord Civic, etc



For 2007 and 2008 Acura TL

For Late Model Lexus IS GS ES LS RX, etc



Features

• Description
• FAQ

This page features one pair (2 pieces) super bright 80W CREE high power 9005 (aka HB3) LED bulbs, plus the special decoder set for the following vehicles on high beam for daytime running lights.

For Scion FR-S, Early Model Subaru WRX, etc

• 2011-2014 Dodge Charger, Grand Caravan
• 2013-2016 Scion FR-S
• 2005-2010 Subaru Legacy, Impreza/WRX, Forester
• 2011-2014 Toyota Sienna
• 2009-up Volkswagen Routan

R1 (For Early Model Lexus IS GS ES Mazda 3 6 CX-5, etc)

• 2001-2005 Lexus IS200 IS300
• 1998-2005 Lexus GS300 GS400 GS430
• 2004-2009 Lexus RX330 RX350 RX400h
• 2001-2005 Lexus ES300 ES330
• 2004-2008 Toyota Solara
• 2004-2010 Toyota Sienna
• 2013-2016 Mazda CX-5 with halogen headlight trim only
• 2014-up Mazda 3 with halogen headlight trim only
• 2014-up Mazda 6 with halogen headlight trim only

R2 (For Acura TL TSX MDX Honda Accord Civic, etc)

• 2013-2015 Acura ILX
• 2009-2014 Acura TSX
• 2007-2013 Acura MDX
• 2007-2015 Acura RDX
• 2009-2014 Acura TL
• 2010-2013 Acura ZDX
• 2006-2015 Honda Civic
• 2006-2017 Honda Accord
• 2006-2016 Honda Odyssey
• 2009-2016 Honda Ridgeline
• 2009-2011 Honda Element
• 2009-2016 Honda Pilot
• 2010-2014 Honda Insight
• 2011-2016 Honda CR-Z

R3 (2007 and 2008 Acura TL)

• 2007-2008 Acura TL

R4 (For Late Model Lexus IS GS ES LS RX, etc)

• 2006-2010 Lexus IS250, IS350 or IS-F
• 2006-2012 Lexus GS300, GS350, GS450h or GS460
• 2007-2012 Lexus ES350
• 2004-2012 Lexus LS430 LS460 LS600
• 2010-2012 Lexus RX350 RX400h
• 2002-2010 Lexus SC430
• 2010-2016 Lexus GX460
• 2008-2012 Lexus LX570
• 2006-2016 Toyota Corolla
• 2009-2016 Toyota Venza
• 2011-2016 Toyota Highlander
• 2012-2017 Toyota Camry
• 2012-2016 Toyota Prius (with DRL enabled version)

R8 (For Late Model Subaru Impreza WRX STI, etc)

• 2008-up Subaru Imperza
• 2008-2017 Subaru WRX/STi
• 2005-up Subaru Forester
• 2006-up Subaru Legacy

This 9005 LED bulb will directly replace the stock 55W 9005 (aka HB3) halogen bulb on the high beam function as daytime running lights and the special DRL decoders will ensure the LED bulbs light up full power without malfunction issue nor flickering issue.

This nice "add-up" will transform your stock dull yellowish halogen daytime running lights into a beautiful HID matching color and look.

 

Have you used this? If so, how long has it lasted for you?

 

I was running the 9005 50W version with the decoder for a little over 3 years. The decoder is to larger for the stock OEM headlights. I took the box apart and heat shrink wrapped the module with 2" inch tubing. This allowed me to be able to put it inside the headlight. Otherwise you'll have to run it without the headlight covers.

Now I'm running the H1cree LED DRL bulbs on my after market Vipmoto headlights. I emailed iJDMtoy to get a compatible decoder. They said it wouldn't work for those size bulbs. So I just hacked in my old R4 decoder to the new H1 Bulbs. So far so good no issues here.

 

Don't these high power LED bulbs make it look like you have your high beams on full power and cause glare?

 

From what I've read, it wouldn't cause a glare since the DRL's are high beams but on "low power"