When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
not yet, my aim is to make it work with OEM switch if possible, if it is not the case then I will follow the same way as George plans, so called Honda method
damn mate, you are lucky that you have found matching color mirrors the second harness is for 360 camera, don't worry about it. I talked one of the guy in the dealership and he told me that most probably mirrors itself will be different in terms of view, because their driver side mirror is meant for our passenger side and vice versa, if this is the case, will have to disassemble your factory one and swap the mirrors, I can confirm that green and blue wires are for folding/unfolding, tested it on my Japanese mirror as well which is for 2021+ years model.
just to verify, the blue and green wires in the
center of these pics are the folding and unfolding wires.. is that correct? I tried a 9v a the end of the harness and nothing is happening for me... im just trying to verify that these are indeed power folding mirrors lol
just to verify, the blue and green wires in the
center of these pics are the folding and unfolding wires.. is that correct? I tried a 9v a the end of the harness and nothing is happening for me... im just trying to verify that these are indeed power folding mirrors lol
I have the same mirror and blue and green wires fold/unfold the mirror, I can confirm that
GOT IT!!!! finally got them to fold with a new 9v... apparently the one I was using didnt have enough power... Now I just need to actually install them lol
GOT IT!!!! finally got them to fold with a new 9v... apparently the one I was using didnt have enough power... Now I just need to actually install them lol
Nice!! I was about to say, check to make sure your 9v isn't dead lol!
but I do think I will need to swap out the driver side motor because the angle is off... also its works with the press of the button only, not automatically... everything was plug and play.. didnt even need to do the 3 relay honda wire method...
one issue I am having is my park assist is disabled and I am getting flashing lights on the dash saying such. not sure why yet.. also the mirrors from Japan had an extra set of wires compared to the US edition..might be why im having an issue with the park assist.. still trying to figure it out.
this is the link to were I got the switch.. and no new wires were ran.. direct plug in. only issue is the angle of the driver side mirror is off a little bit. but I think when i swap the insides of the mirror, it should be fixed.. at least I hope so.. Also as a reminder, the auto button on the switch does not function as intended.. i mean the button physically works, but does not automatically fold the mirrors when the car is turned off..
Last edited by OCJACKAL; 01-27-24 at 12:29 PM.
Reason: misspelled word lol
01-16-24, 10:50 PM
the second harness is for 360 camera, don't worry about it. I talked one of the guy in the dealership and he told me that most probably mirrors itself will be different in terms of view, because their driver side mirror is meant for our passenger side and vice versa, if this is the case, will have to disassemble your factory one and swap the mirrors, I can confirm that green and blue wires are for folding/unfolding, tested it on my Japanese mirror as well which is for 2021+ years model.
