When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I bought a "sly bracket" before I left to come to Germany because I didn't want to drill into my beauty. It's been excellent after 2 years so I highly recommend it (way better than a tow hook mount IMHO. https://www.slybrackets.com/
I've always loved the work done and builds on everyone's IS. I just wanted to share mine.
Any thoughts, suggestions, constructive feedback etc. are always welcome.
Enjoy!
Some small changes:
Top is the before, and bottom is the current set up.
Also switched up my shift ****. I was inspired by the first gen IS
Tein Flex Z Coilovers at the "stock" height in the book.
The wheels are Niche M226 and car specific. I couldn't tell you the offset but they are 19x8.5 and 19x9.5 I just bought them from site for that car.
They rub on bump or a hard cornering, waiting on the camber adjustment arms to add a little negative camber to clear the fender.
Oh if you gonna do the RCF/GSF Brakes the fronts need 10mm spacer w/ studs.
06-30-20, 05:09 AM
