Anyone have the AimGain kit installed?
#62
Thanks, I think it is a lighting angle issue, from some angles it matches and others it seems off, not to mention it is freshly painted but most importantly in person it doesn't look off. There's some pics from their official car that seems off too if you look closely.
#64
Lead Lap
iTrader: (10)
hit up dat@speedalliance.com tell him Kien sent you. He can get you whatever you need that is available on the market.
Last edited by Silec; 08-14-14 at 12:30 PM.
#65
Driver School Candidate
Join Date: Nov 2001
Location: Florida
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys, my rear diffuser finally arrived today, been waiting for it since mid June. Looking for some quick and accurate advice...I assumed that the muffler cutter and muffler finisher came with the diffuser, apparently it's sold separately. The distributor I purchased it from advised me that it's a stock part off of the GS or the LS. He wasn't sure and said he'd get back to me soon with the answer. Does anyone know whether it's the GS or LS muffler cutter/finisher???
#69
Your #1 Lexus Vendor
iTrader: (8)
still waiting on my diffuser to come in..
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#71
Driver School Candidate
Join Date: Nov 2009
Location: VA
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
For any aftermarket exhaust (or F-Sport) to fit, you will need to chop the tip off of the exhaust, and make a custom angled exit in order to line up with the new diffuser exit. In our application we were able to re-use the provided angled tip from aimgain, but it is likely you will need to make modification to the Aimgain supplied "Muffler tip finisher" bracket in order to make a new, custom tip fit.
#72
Lead Lap
iTrader: (2)
Sorry for the 2 month dead thread bump, but thought I'd answer this in case anyone else is looking.
For any aftermarket exhaust (or F-Sport) to fit, you will need to chop the tip off of the exhaust, and make a custom angled exit in order to line up with the new diffuser exit. In our application we were able to re-use the provided angled tip from aimgain, but it is likely you will need to make modification to the Aimgain supplied "Muffler tip finisher" bracket in order to make a new, custom tip fit.
For any aftermarket exhaust (or F-Sport) to fit, you will need to chop the tip off of the exhaust, and make a custom angled exit in order to line up with the new diffuser exit. In our application we were able to re-use the provided angled tip from aimgain, but it is likely you will need to make modification to the Aimgain supplied "Muffler tip finisher" bracket in order to make a new, custom tip fit.
#74
Racer
iTrader: (3)
locate a aimgain dealer to order http://www.aimgain.net/english/world/index.html
#75
Driver School Candidate
Join Date: Sep 2015
Location: Sedalia
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
thread is about aimgain. aimgain exhaust
locate a aimgain dealer to order http://www.aimgain.net/english/world/index.html
locate a aimgain dealer to order http://www.aimgain.net/english/world/index.html