Steps to modify the lane change flasher time change
#31
My dealer straight out said it couldn't be done. Once I did it on my own, I let them know that it can be done (they just kind of smirked and thought I "hacked it" somehow and said "we aren't responsible for damages as a result of you tinkering with the electronics" LOL).
Chris
#32
Wanted to get my lane change flasher timing from 3 blinks to 5 and went to dealer to have them do it. Since they were busy, they just printed the steps out for me and I did it myself. It works and I thought I'd share.
The lane change flasher can be adjusted from no flashes, 3, 5, or 7 flashes
Adjustment procedure is:
1. Ignition OFF, hold the wiper switch in the all the way up (OFF) position, turn ignition ON, engine not running, and continue to hold the wiper switch in the OFF position for 5 seconds or more
2. Move wiper switch down 1 position and HOLD for 5 seconds or more
3. Move the wiper switch up to OFF position and hold for 5 seconds or more
4. Move wiper switch down 1 position and hold for 5 seconds or more
5. Release the wiper switch. The right turn signal should flash 1 time
6. Place the intermittent wiper rotary switch in one of the following 4 positions
-P1 - all the way down = 3 flashes
-P2 - 1 up from the bottom = 5 flashes
-P3 - 2 up from the bottom = 7 flashes
-P4 - All the way up = no flashes
7. Pull the turn signal switch down the lane change position (not the turn signal position) and release. The left turn signal should flash 2-4 times.
8. Turn the ignition OFF and then start the car and test.
This should also apply GS I think. Enjoy and hope this helps.
The lane change flasher can be adjusted from no flashes, 3, 5, or 7 flashes
Adjustment procedure is:
1. Ignition OFF, hold the wiper switch in the all the way up (OFF) position, turn ignition ON, engine not running, and continue to hold the wiper switch in the OFF position for 5 seconds or more
2. Move wiper switch down 1 position and HOLD for 5 seconds or more
3. Move the wiper switch up to OFF position and hold for 5 seconds or more
4. Move wiper switch down 1 position and hold for 5 seconds or more
5. Release the wiper switch. The right turn signal should flash 1 time
6. Place the intermittent wiper rotary switch in one of the following 4 positions
-P1 - all the way down = 3 flashes
-P2 - 1 up from the bottom = 5 flashes
-P3 - 2 up from the bottom = 7 flashes
-P4 - All the way up = no flashes
7. Pull the turn signal switch down the lane change position (not the turn signal position) and release. The left turn signal should flash 2-4 times.
8. Turn the ignition OFF and then start the car and test.
This should also apply GS I think. Enjoy and hope this helps.
#33
Driver School Candidate
For any 3IS newbies (like me), I followed this on my 2018 IS350 and it worked like a charm: https://www.youtube.com/watch?time_c...&v=wECSYAX3_70
Chris
Chris
#35
Not that I've found.
That's the idea with this thread.
Programmable Personalized Settings
I will contact my local dealers and see what help they may be, then post in there.
That's the idea with this thread.
Programmable Personalized Settings
I will contact my local dealers and see what help they may be, then post in there.
#37
For any 3IS newbies (like me), I followed this on my 2018 IS350 and it worked like a charm: https://www.youtube.com/watch?time_c...&v=wECSYAX3_70
Chris
Chris
#38
For any 3IS newbies (like me), I followed this on my 2018 IS350 and it worked like a charm: https://www.youtube.com/watch?time_c...&v=wECSYAX3_70
Chris
Chris
Thread
Thread Starter
Forum
Replies
Last Post