Aftermarket Wheel Showcase - 3ISx Exclusive
12-28-18, 03:36 PM
#1501
If the offsets were swapped, then you would be ok.
The front is hard to say because with the +38 offset it really comes down to rim design if it will clear at this point.
The rear is gonna stick out past the fender a little. It might tuck in enough when the suspension compresses and clear the fender, but it's gonna be close.
The front is hard to say because with the +38 offset it really comes down to rim design if it will clear at this point.
The rear is gonna stick out past the fender a little. It might tuck in enough when the suspension compresses and clear the fender, but it's gonna be close.
12-28-18, 04:12 PM
#1502
Lexus Test Driver
Join Date: Feb 2017
Location: Richmond Hill, Ontario, Canada
Posts: 6,260
Received 1,737 Likes
on
1,370 Posts
The safe bet would be to pass on them, but it's up to you.
12-28-18, 07:28 PM
#1503
12-29-18, 01:35 PM
#1505
The rear wont stick out a ridiculous amount, but definitely noticeable when compared to the front. The top of the rim should be just about flush with the fender, which means the rest of the rim would be outside the fender when you consider the natural negative camber of the rear, plus being lowered.
The safe bet would be to pass on them, but it's up to you.
The safe bet would be to pass on them, but it's up to you.
12-29-18, 01:38 PM
#1507
Lexus Test Driver
Join Date: Feb 2017
Location: Richmond Hill, Ontario, Canada
Posts: 6,260
Received 1,737 Likes
on
1,370 Posts
12-29-18, 09:44 PM
#1508
01-01-19, 09:47 PM
#1509
Driver School Candidate
Is anyone on RSR superdowns on AWD with
fronts 18x8.5 +35
rears 18x9.5 +35
with stock 225/40 and 255/35 tires? Wanted to know if theres fender work to be done
fronts 18x8.5 +35
rears 18x9.5 +35
with stock 225/40 and 255/35 tires? Wanted to know if theres fender work to be done
01-01-19, 10:04 PM
#1510
Driver School Candidate
Nice setup! If you dont mind me asking, are you on stock 225/40 and 255/35 tires? I got an eye on the same spec rims but with an offset of +35 but ill be lowered on superdowns..wanted to kno if you rub at all?
01-02-19, 11:05 AM
#1511
Don't suppose you put the springs on yet? I'm curious over your tires, most people I see are running 235/35R19 and 265/30R19, yours would give a little meatier tread and hopefully more tolerable ride comfort.
Also wondering if anyone has run anything like 235/40/R19 and 265/35R19.
Also wondering if anyone has run anything like 235/40/R19 and 265/35R19.
01-02-19, 02:35 PM
#1512
Don't suppose you put the springs on yet? I'm curious over your tires, most people I see are running 235/35R19 and 265/30R19, yours would give a little meatier tread and hopefully more tolerable ride comfort.
Also wondering if anyone has run anything like 235/40/R19 and 265/35R19.
Also wondering if anyone has run anything like 235/40/R19 and 265/35R19.
The following users liked this post:
LexoticJ (01-29-20)
01-06-19, 08:05 PM
#1515
Lexus Test Driver
Join Date: Feb 2017
Location: Richmond Hill, Ontario, Canada
Posts: 6,260
Received 1,737 Likes
on
1,370 Posts
Finally got my Ace Alloy wheels on. Many thanks to Sasnuke, Lexi90, Max6133, and EvilJoker for the help.
Aced It. by Andrew Thompson, on Flickr
Aced It. by Andrew Thompson, on Flickr
The following users liked this post:
VisualEcho (01-06-19)