Aftermarket Wheel Showcase - 3ISx Exclusive
#2806
The following 2 users liked this post by Napalvr:
KObjective (08-18-24),
NYIS300awdFS (07-06-24)
#2807
Thanks buddy. My last wheels were a gunmetal Grey and that's as dark as I go. Black wheels just have no real noticeable design to them at night or in pictures in my opinion so I tend to stay away myself. Obviously some great looking wheels/cars here, just personal preference.
The following users liked this post:
Napalvr (07-06-24)
#2808
Sharp ride, white with yellow calipers and those spiderweb spoke silver wheels looks fantastic. Really like the duckbill and the carbon. Well done.
#2809
Thanks! The yellow is divisive amongst many people; some say it looks good, some say it looks terrible. I absolutely love it as it's different
#2810
When I first got my wheels, it did rub near the rear bumper, but I got someone to help me shave the rear bumper mount so it can clear and also raise the rear a tad bit higher
Last edited by HL3IS; 07-09-24 at 03:54 PM. Reason: i did quick reply and forgot to add the quote to who i am replying too
#2812
Im shopping around for new wheels/tires and im kinda thinking just getting slightly larger tires.
Ive been doing research on it and i picked sizes that will keep the ratio the same, though its really small difference on 2021 is 350 awd
On the front, 235/40R19 to a 245/40/R19
On the rear, 265/35R19 to a 275/35/R19
The ratio goes from 0.38% to 0.37% so its veeeery small
I want a little larger look, not stock, but i dont want any chance of rubbing for daily use. I also like the stock wheels, so im not rushing to spend money on new wheels. Just tires at this point
Ive been doing research on it and i picked sizes that will keep the ratio the same, though its really small difference on 2021 is 350 awd
On the front, 235/40R19 to a 245/40/R19
On the rear, 265/35R19 to a 275/35/R19
The ratio goes from 0.38% to 0.37% so its veeeery small
I want a little larger look, not stock, but i dont want any chance of rubbing for daily use. I also like the stock wheels, so im not rushing to spend money on new wheels. Just tires at this point
#2813
Pit Crew
Im shopping around for new wheels/tires and im kinda thinking just getting slightly larger tires.
Ive been doing research on it and i picked sizes that will keep the ratio the same, though its really small difference on 2021 is 350 awd
On the front, 235/40R19 to a 245/40/R19
On the rear, 265/35R19 to a 275/35/R19
The ratio goes from 0.38% to 0.37% so its veeeery small
I want a little larger look, not stock, but i dont want any chance of rubbing for daily use. I also like the stock wheels, so im not rushing to spend money on new wheels. Just tires at this point
Ive been doing research on it and i picked sizes that will keep the ratio the same, though its really small difference on 2021 is 350 awd
On the front, 235/40R19 to a 245/40/R19
On the rear, 265/35R19 to a 275/35/R19
The ratio goes from 0.38% to 0.37% so its veeeery small
I want a little larger look, not stock, but i dont want any chance of rubbing for daily use. I also like the stock wheels, so im not rushing to spend money on new wheels. Just tires at this point
if you are worried about AWD system - as long as diameter of the wheels is the same as stock, you are good 👍🏻 width doesn’t affect AWD system
#2814
So if you increase the width, my understanding is the sidewall is a % of the width so it does technically increase?
Unless it only matters about the wheel and not the tire. I just assumed it does technically increase, but its just negligable with only 10mm added on each wheel?
Cool to see you were able to -10 on the front and -35 on the rear (assuming again, stock is +45 front and +60 rear) and have no issues!
Definitely eases my concerns looking at wheels. The stock wheels i have are actually scuffed up from the previous owner, so I was thinking about getting them treated or just getting new wheels at some point.
Thread
Thread Starter
Forum
Replies
Last Post
sincityIS
IS - 2nd Gen (2006-2013)
32
08-24-07 09:06 AM
JCtx
SC430 - 2nd Gen (2001-2010)
15
12-03-06 05:55 PM