When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
yes i did this install yesterday. very simple. take off the steering column shroud plastic pieces off (turn the wheel to the 3 and 9 o clock position to access the screws and and release the clips to separate the two halves). the black 7 pin connector will then visible it is plugged in on the bottom .
yes i did this install yesterday. very simple. take off the steering column shroud plastic pieces off (turn the wheel to the 3 and 9 o clock position to access the screws and and release the clips to separate the two halves). the black 7 pin connector will then visible it is plugged in on the bottom .
Thanks for the concise reply. I managed to find the connector shortly after I made my post. I was misled by the guides I was using and didn't realize it was attached to the steering column lol... I ended up finishing the install last weekend - everything works perfectly!
Anyone know if there's a fuse for the turn signal/lights stalk? I installed the ALCA a few weeks ago and everything works great... but all of a sudden now I can't turn the DRL's off, parking lights on, or lights on via the turn signal stalk (lights only turn on and off through the automatic sensor). Not sure what could be wrong?
Very new to the forum, so apologies if this is a dumb question. Will this work on a non Nav model? I know some features are affected by whether it's a Nav model or not.
Very new to the forum, so apologies if this is a dumb question. Will this work on a non Nav model? I know some features are affected by whether it's a Nav model or not.
It doesn't matter for remote start to work if non Navi or Navi model
So to be clear the only needed hardware needed to install remote start through factory the factory key fob are #1 ads alca rs tl7 & #2 ada usb weblink cable (if using pc) or is a #3 compatible rf kit also necessary/hcx000a? (again wanting to use oem key fobs only)
Sorry to dig up an old thread, However with the help of the OP who I found on IG, I did this install and it worked exactly as described.
One side note my 2014 is350 F sport came with electronic powered steering column and because of this the Steering column plug was nowhere close to the ones shown in the pictures.
Below is a pic of my car and where the motor is for the electric column adjustment and behind it is where the black steering column plug is on my car.
Yes this was a successful install with the exact same wiring and plugs as described above how ever the location of my steering plug was different because of my electric steering column.
01-21-18, 09:56 AM
