F-sport bumper conversion
#31
Driver School Candidate
Join Date: Mar 2017
Location: nevada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Hi Im new here, i have an is250 2015 base model, I just want to ask if how much did it cost you to do all the conversion? And can u show me a before and after picture of conversion.is your IS a base model as well?thankyou so much!!
#32
Lexus Champion
iTrader: (74)
#33
Driver School Candidate
Join Date: Apr 2017
Location: ca
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Fsport fender liner.
the dealer claims they are the same and I'm having trouble finding the fsport fender liners.
thanks in advance!
#34
Driver School Candidate
Thread Starter
All done!
I visited my sister this weekend and my brother in law (who is an automotive painter, what luck!) donated his Saturday to getting the bumper painted and installed. I'll try and find the motivation to post part numbers later, but I'll list below the parts and considerations for this specific kit.
- The F-Sport bumper itself is bolt on.
- Holes need to be made for the side proximity sensors (5/8" hole). There's a guide stenciled on the inside of the bumper so there's no guessing where to make the hole.
- Parts:
- Mounting hardware for side proximity sensors and grill sensors
- Bumper shock absorber (I didn't realize this and just took it off). You can probably trim it down if you have a saw since it's just compressed foam.
- Headlight sprayer covers (If those holes are in yours). We used some clips to secure them from the back side and cut a gasket to sit between the paint and the cover. Looks good, and we'll see how it holds up. You could also fill the holes if you have time for that.
- Fender liner clip? There's a part that attaches the fender liner to the bumper that is different for the F-Sport bumper. These come with the kit I bought.
- Kit comes with the 3 grill pieces
- Bottom side vents (where fog lights would go). They come with this kit. My car had foglights, but I left them off since I had no way to mount them and I don't think
Last edited by tdawson2; 10-23-17 at 10:44 AM.
#35
Your bro in law is a boss pro!! That color match and paint job is flawless. Black is the hardest color to match and it was done very well.
Go easy on the paint, it can take up to 30 days for it to fully cure and settle in. Avoid roads with lots of dirt and rocks, as you can get paint chips very easily before the paint cures.
Go easy on the paint, it can take up to 30 days for it to fully cure and settle in. Avoid roads with lots of dirt and rocks, as you can get paint chips very easily before the paint cures.
#36
Driver School Candidate
Thread Starter
Your bro in law is a boss pro!! That color match and paint job is flawless. Black is the hardest color to match and it was done very well.
Go easy on the paint, it can take up to 30 days for it to fully cure and settle in. Avoid roads with lots of dirt and rocks, as you can get paint chips very easily before the paint cures.
Go easy on the paint, it can take up to 30 days for it to fully cure and settle in. Avoid roads with lots of dirt and rocks, as you can get paint chips very easily before the paint cures.
#37
Driver School Candidate
Join Date: Sep 2018
Location: New York
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
i did this Mod, probably the best mod you can do to your non-F-sport lexus. I got it from the same ebay seller.
its a perfect fit and very high quality, a paint shop will prime sand and paint match the bumper for about $300-450
Install takes about 3 hours if you are taking your time. you will loose your fog lights, but who cares, ive never fancied fog lights.
as for the headlamp washer holes, just get the heads and jerry rig them over the holes, i personally think the washer heads look really good. Paint match them to your car or paint the chrome black pearl to make them pop.
get the washer heads here, craps only 14 bucks for both sides.
part # 85353-53021 http://parts.autonationtoyotasouthau...8535353021part # 85354-53021 http://parts.autonationtoyotasouthau...xus/8535453021
its a perfect fit and very high quality, a paint shop will prime sand and paint match the bumper for about $300-450
Install takes about 3 hours if you are taking your time. you will loose your fog lights, but who cares, ive never fancied fog lights.
as for the headlamp washer holes, just get the heads and jerry rig them over the holes, i personally think the washer heads look really good. Paint match them to your car or paint the chrome black pearl to make them pop.
get the washer heads here, craps only 14 bucks for both sides.
part # 85353-53021 http://parts.autonationtoyotasouthau...8535353021part # 85354-53021 http://parts.autonationtoyotasouthau...xus/8535453021
#38
Driver School Candidate
Join Date: Sep 2021
Location: Texas
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#39
Lexus Test Driver
Join Date: Feb 2017
Location: Richmond Hill, Ontario, Canada
Posts: 6,260
Received 1,738 Likes
on
1,371 Posts
#40
Driver School Candidate
Join Date: Sep 2021
Location: Texas
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
#41
Lexus Test Driver
Join Date: Feb 2017
Location: Richmond Hill, Ontario, Canada
Posts: 6,260
Received 1,738 Likes
on
1,371 Posts
Thread
Thread Starter
Forum
Replies
Last Post
JeffreyVay
IS - 3rd Gen (2014-present)
22
10-18-19 08:30 AM
SNiiP3R
GS - 4th Gen (2013-2020)
7
05-18-16 08:03 AM