IS - 3rd Gen (2014-present) Discussion about the 2014+ model IS models

10.25 Inch Display Android Car Radio GPS Navigation Head Unit from 4x4Shop.ca

Thread Tools
 
Search this Thread
 
Old 12-30-18, 01:21 PM
  #421  
JWIS350
Driver
 
JWIS350's Avatar
 
Join Date: Feb 2016
Location: Saskatchewan
Posts: 132
Received 20 Likes on 12 Posts
Default

10.25 Inch Display Android Car Radio GPS Navigation Head Unit from 4x4Shop.ca-photo440.jpg

This blue cable where the screen goes.
Old 12-30-18, 05:35 PM
  #422  
Flash5
Pole Position
 
Flash5's Avatar
 
Join Date: Apr 2018
Location: GA
Posts: 2,627
Received 459 Likes on 367 Posts
Default

Originally Posted by JWIS350
Attachment 477265

This blue cable where the screen goes.
That blue cable that was connected to the OEM screen should go to the new screen in the same spot. Idk if it’s different for the nav models 🤔
Old 12-30-18, 09:46 PM
  #423  
JWIS350
Driver
 
JWIS350's Avatar
 
Join Date: Feb 2016
Location: Saskatchewan
Posts: 132
Received 20 Likes on 12 Posts
Default

This cable is not needed for this install.

Attachment 477264

Got it all hooked up and testing. So far, its a little buggy. The offline navigation is in a different language (maybe Russian or something) so I can even figure it out. I can not get the Carplay to work correctly. I get an error saying the box isn't register properly every time I plug the dongle in. Going to make a whiskey and I'll post a few pics.
Old 12-30-18, 10:57 PM
  #424  
JWIS350
Driver
 
JWIS350's Avatar
 
Join Date: Feb 2016
Location: Saskatchewan
Posts: 132
Received 20 Likes on 12 Posts
Default

10.25 Inch Display Android Car Radio GPS Navigation Head Unit from 4x4Shop.ca-photo469.jpg

This is the error I get when I plug in the CarPlay dongle.
Old 12-31-18, 07:48 AM
  #425  
Flash5
Pole Position
 
Flash5's Avatar
 
Join Date: Apr 2018
Location: GA
Posts: 2,627
Received 459 Likes on 367 Posts
Default

Originally Posted by JWIS350
Attachment 477268

This is the error I get when I plug in the CarPlay dongle.
Contact 4x4 they just need to give you the right firmware for Apple CarPlay. It happened to a few of us when we updated the actual firmware/software they had to give us a new firmware for Apple CarPlay.
Old 12-31-18, 11:10 AM
  #426  
JWIS350
Driver
 
JWIS350's Avatar
 
Join Date: Feb 2016
Location: Saskatchewan
Posts: 132
Received 20 Likes on 12 Posts
Default

Any chance you could email that file? Guys are closed until the 2nd. Just my luck lol

Finishing up my install with a USB extension cable so I can use the center console for plugging in my iPhone. Ran the GPS antenna which is a PIA but necessary as I want all the functionality available with this setup.

Happy NYE too!
Old 12-31-18, 12:40 PM
  #427  
Flash5
Pole Position
 
Flash5's Avatar
 
Join Date: Apr 2018
Location: GA
Posts: 2,627
Received 459 Likes on 367 Posts
Default

Originally Posted by JWIS350
Any chance you could email that file? Guys are closed until the 2nd. Just my luck lol

Finishing up my install with a USB extension cable so I can use the center console for plugging in my iPhone. Ran the GPS antenna which is a PIA but necessary as I want all the functionality available with this setup.

Happy NYE too!
I don’t have it man sorry haha. I deleted it after I installed it on the unit. Happy New Year to you too
Old 01-01-19, 11:15 AM
  #428  
JoA
Driver School Candidate
 
JoA's Avatar
 
Join Date: Dec 2018
Location: Ontario
Posts: 9
Received 1 Like on 1 Post
Default

I have one of these installed in my Tundra, I actually took it apart, powdercoated the bezel to match the other trim I blacked out and soldered a better microphone. We absolutely love it, Waze, TomTom local maps, unlimited Spotify skips, YouTube, plays our own mkv’s and mp3’s, does CarPlay etc etc.

I’m thinking of doing the horizontal version in the NX200T we just got. Everything works as it should in my truck, do you guys have any issues?




Old 01-03-19, 03:42 PM
  #429  
MD3
Pit Crew
 
MD3's Avatar
 
Join Date: Nov 2018
Location: SoCal
Posts: 137
Received 10 Likes on 9 Posts
Default

Originally Posted by JWIS350
Any chance you could email that file? Guys are closed until the 2nd. Just my luck lol

Finishing up my install with a USB extension cable so I can use the center console for plugging in my iPhone. Ran the GPS antenna which is a PIA but necessary as I want all the functionality available with this setup.

Happy NYE too!
How did the troubleshooting with the rear camera and carplay go... is it working properly now?
Old 01-03-19, 08:29 PM
  #430  
MD3
Pit Crew
 
MD3's Avatar
 
Join Date: Nov 2018
Location: SoCal
Posts: 137
Received 10 Likes on 9 Posts
Default

Originally Posted by Droth
Installed unit yesterday (nav + jog control version). Can confirm wiring harness correct and jog control works.
Basic testing everything seems to work although quirky
Had to set backup cam to non oem in settings to get to work (even though it then uses oem connection) and then doesn't show parking sonar. With backup camera in oem mode it shows parking sonar but no image (camera cable supplied makes no difference). Will email Fred re this.
Also for those with RHD, plastic bit supplied that fits below screen is for LHD only

Octa core and 4gb would be nice, unit isn't exactly fast
Did you get the backup camera working properly?
Old 01-04-19, 03:25 AM
  #431  
and3re
Driver
 
and3re's Avatar
 
Join Date: Apr 2017
Location: Ontario
Posts: 122
Received 17 Likes on 14 Posts
Default

....I'm super jealous of this


​​​​​​
Originally Posted by JoA



Old 01-05-19, 10:44 AM
  #432  
MD3
Pit Crew
 
MD3's Avatar
 
Join Date: Nov 2018
Location: SoCal
Posts: 137
Received 10 Likes on 9 Posts
Default

Originally Posted by JWIS350
Attachment 477260

Yup. I got to this part and was like....wtf

Attachment 477261

I'm guessing I don't need this cable. I have navigation with jog controller.

Thanks for the reply man ?
I'm prepping for the install with jog controller... which USB is used/what is the difference in the USBs? There is one coming from the harness and one coming from the back of the screen with the blue connection attached.

Last edited by MD3; 01-05-19 at 10:52 AM.
Old 01-05-19, 11:18 AM
  #433  
lyousufzai
Driver School Candidate
 
lyousufzai's Avatar
 
Join Date: Dec 2015
Location: Ontario
Posts: 22
Received 0 Likes on 0 Posts
Default Crashing

Have you experience the issue when you are in the Android part and for no reason it flips back to Lexus stock screen?
Yesterday the whole thing was unusable because as soon as I went into the android part, it would just flip back to android screen. I restarted my car twice to see if it would fix itself but no such luck.
It's been quite a bit finicky in the past where I turned the volume with the **** or on the steering wheel it would flip back to the Lexus screen.
Old 01-05-19, 01:12 PM
  #434  
Flash5
Pole Position
 
Flash5's Avatar
 
Join Date: Apr 2018
Location: GA
Posts: 2,627
Received 459 Likes on 367 Posts
Default

Originally Posted by lyousufzai
Have you experience the issue when you are in the Android part and for no reason it flips back to Lexus stock screen?
Yesterday the whole thing was unusable because as soon as I went into the android part, it would just flip back to android screen. I restarted my car twice to see if it would fix itself but no such luck.
It's been quite a bit finicky in the past where I turned the volume with the **** or on the steering wheel it would flip back to the Lexus screen.
A new update was put out for this. Contact 4x4.
Old 01-05-19, 07:25 PM
  #435  
lyousufzai
Driver School Candidate
 
lyousufzai's Avatar
 
Join Date: Dec 2015
Location: Ontario
Posts: 22
Received 0 Likes on 0 Posts
Default

Thanks, I got mine installed in mid November and I was hoping mine had the updated software already. I made an appointment with 4x4 for next week.


Quick Reply: 10.25 Inch Display Android Car Radio GPS Navigation Head Unit from 4x4Shop.ca



All times are GMT -7. The time now is 07:22 AM.