Show me your 2017+ exhaust/tips.
#1
Pole Position
Thread Starter
Show me your 2017+ exhaust/tips.
One of the things I dislike most about my 2018 is the exhaust tips. In truth, I'm not too enamored with many I've seen. There are some Agency Power black chrome tips made for a Porsche that I really like, but they're nearly as expensive as an axle-back exhaust!
Pic of my ugly exhaust.
Pic of my ugly exhaust.
The following users liked this post:
VisualEcho (12-06-18)
#4
Same thought as you, those original ones don't fit too well. How about this? Fits right in with the diffuser.
got this off amazon for about 80 bucks
(you may want to get at least an axle-back first since those are 2.5" inlet and 4" out, staggered as well)
got this off amazon for about 80 bucks
(you may want to get at least an axle-back first since those are 2.5" inlet and 4" out, staggered as well)
Last edited by Maxxxx; 12-06-18 at 05:34 PM.
#6
Pole Position
Thread Starter
How about this? Fits right in with the diffuser.
(you may need to zoom in a bit, LOL)
got this off amazon for about 80 bucks
Universal Bolt-On Round Cut Dual... https://www.amazon.com/dp/B079YZ87YG?ref=yo_pop_ma_swf
(you may need to zoom in a bit, LOL)
got this off amazon for about 80 bucks
Universal Bolt-On Round Cut Dual... https://www.amazon.com/dp/B079YZ87YG?ref=yo_pop_ma_swf
#7
Pole Position
Thread Starter
Trending Topics
#8
Instructor
iTrader: (1)
I bought the bolt on style, you could just take off your tips and bolt this on, the factory pipe is 2.5 so you need a 3.75 to slip over, I wanted the tips to sit in further so I cut the factory exhaust bracket and welded this on, now the tips stick out maybe an inch from the diffuser
The following users liked this post:
VisualEcho (12-06-18)
#9
The following users liked this post:
VisualEcho (12-06-18)
#10
Pole Position
Thread Starter
I was asking because I really like tucked exhausts. If you get a chance to take some from the side tomorrow, please do so! I mean, I could always cut the pipe back a bit and tuck them.
#11
The following users liked this post:
VisualEcho (12-06-18)
#12
The following users liked this post:
VisualEcho (12-07-18)
#14
im fine with them sticking out like this, not too little and not too much, looks more aggressive
im thinking, maybe you can have your local muffler shop custom build an extra pipe without mufflers, just so you can keep the original intact(easiest way to be loud and throaty, check your local laws first though, or YOLO it)