Fender Modifications for super low suspension / air out
#1
Former Sponsor
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Hoping someone can post before and/or after photos of their fender modifications for low air out. Even just a side photo with the bumper removed should be very helpful.
- Bumper tab trim
- Fender/bumper brace/frame
- Bumper tab trim
- Fender/bumper brace/frame
#2
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I am able to fully air out without modifications to the fenders with the stock F Sport wheels.
15mm spacers in the front and 20mm in the rear. In the rear some of the bolts in the fender come about a quarter inch from touching the tire.
15mm spacers in the front and 20mm in the rear. In the rear some of the bolts in the fender come about a quarter inch from touching the tire.
![](https://scontent-ort2-1.xx.fbcdn.net/v/t1.15752-9/s2048x2048/52486502_735500506834043_6994621341257170944_n.jpg?_nc_cat=101&_nc_ht=scontent-ort2-1.xx&oh=9b16c02b882393f65f8707e2d4ee6465&oe=5D19EE9B)
#4
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
You can see where the bolts are compared to the tire. This is with the spacers I mentioned before.
![](https://cimg5.ibsrv.net/gimg/www.clublexus.com-vbulletin/1500x2000/fenderuhoedited1_a59c120455aa6652c94726b1c3e381931bb2dfaf.jpg)
![](https://cimg8.ibsrv.net/gimg/www.clublexus.com-vbulletin/1500x2000/fenderuhoh2edtied_add5af4001e5b5bec23a878d9302f9b775c13b4a.jpg)
#5
Former Sponsor
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have about 2mm clearance from wheel to rear quarter panel, and I can air out completely.
Front there is a bunch of stuff behind the fender liner around the fender/bumper connection area.
Front there is a bunch of stuff behind the fender liner around the fender/bumper connection area.
Thread
Thread Starter
Forum
Replies
Last Post
bogohead
IS - 2nd Gen (2006-2013)
7
02-21-12 04:42 PM