2021+ IS Picture Thread
The following users liked this post:
arentz07 (05-10-22)
#454
Here's the wheel that I had replaced, which is as shiny as a mirror!
Last edited by arentz07; 05-10-22 at 10:21 AM.
#455
Good news! It looks like the front and rear anti-roll-bars will in fact go into production. We had my car on the lift to check everything one last time. The photos are of the rear bar, just goes to show how small the clearance is, I don't see a way of doing this without lowering the subframe for more room.
The following 4 users liked this post by VittorioS:
The following users liked this post:
arentz07 (05-26-22)
The following users liked this post:
wthrman2 (06-10-22)
The following 6 users liked this post by Series10:
arentz07 (06-01-22),
Avening (06-14-22),
Napalvr (06-02-22),
NateDogg79 (06-09-22),
Racer00J (06-05-22),
and 1 others liked this post.
The following users liked this post:
PrinceIS350FS (11-28-23)
The following 3 users liked this post by snewin:
#465
Good news! It looks like the front and rear anti-roll-bars will in fact go into production. We had my car on the lift to check everything one last time. The photos are of the rear bar, just goes to show how small the clearance is, I don't see a way of doing this without lowering the subframe for more room.
The following users liked this post:
twalls (07-20-22)