When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Be careful if you're trying to keep any components from the 2021 factory airbox (photo attached). I was under the erroneous assumption that nothing under the hood had changed from 2020, but the 2021 airbox appears to be the RC/GS design. Therefore, the popular IS350 F-Sport intake (PTR03-53141) will not completely fit. You can still use the tube and filter, but the upper airbox with the nice logo has different latching points. Of course, if you choose to discard the airbox, all of the existing open short ram intakes should still fit.
Probably have to wait for stuff to actually start coming out for the 21. or wait for someone to try the fitment from a previous IS/RC/GS,ect. The 21 JUST got released something like a month ago, it's most likely going to be a little wait for the 21 specific stuff to be released.
Be careful if you're trying to keep any components from the 2021 factory airbox (photo attached). I was under the erroneous assumption that nothing under the hood had changed from 2020, but the 2021 airbox appears to be the RC/GS design. Therefore, the popular IS350 F-Sport intake (PTR03-53141) will not completely fit. You can still use the tube and filter, but the upper airbox with the nice logo has different latching points. Of course, if you choose to discard the airbox, all of the existing open short ram intakes should still fit.
All you need to do is get the OEM upper lid cover off the 2020...
I doubt we will see a different line of F Sport USA Accessory / performance parts for 2021+ IS's
Anyone have an idea where I can purchase
an intake online for 2021 IS350F?
TIA!
I've been looking for one too with no luck so I bought a universal adapter from orilies auto parts and I 3D printed a mount for the sensor, then I attached a basic cone 9filter. It sounds amazing! But I will be buying the whole kit as soon as it's available.
not gonna lie, navigating the site could be better.. would rather not have to select each individual vendor/manufacturer of a specific component set, and the pics are way too small, especially when trying to decide on parts that cost a lot of money..
I've been looking for one too with no luck so I bought a universal adapter from orilies auto parts and I 3D printed a mount for the sensor, then I attached a basic cone 9filter. It sounds amazing! But I will be buying the whole kit as soon as it's available.
The 350 engine is identical from the 2014 to 2020..
I've been looking for one too with no luck so I bought a universal adapter from orilies auto parts and I 3D printed a mount for the sensor, then I attached a basic cone 9filter. It sounds amazing! But I will be buying the whole kit as soon as it's available.