IS 500 Threads Conversations specifically about the 2022+ IS500 models.

Others having paint issues?

Thread Tools
 
Search this Thread
 
Old 02-12-24, 09:26 AM
  #16  
Longwaldo
Pit Crew
 
Longwaldo's Avatar
 
Join Date: Jun 2023
Location: GA
Posts: 160
Received 79 Likes on 49 Posts
Default

removed ......
Old 02-12-24, 09:27 AM
  #17  
Benibiker1558
Intermediate
 
Benibiker1558's Avatar
 
Join Date: Aug 2023
Location: Hawaii
Posts: 377
Received 398 Likes on 178 Posts
Default

Originally Posted by arentz07
Well, I need to find a red Sharpie, lol

And yeah, Infrared is one of those three-stage paints - base, mid, then clear coat. So it'll probably be noticeable. The issue I am having is that one of the chips is deep enough that the paint doesn't want to adhere to it nicely. I may have to just layer the primer a few times to fill in the hole... <sigh>.
I actually used a black Sharpie, something about our infrared paint that actually has some black in it and you won't notice the thin layer of black Sharpie LOL. Has to be a small chip though, haven't had to try it on a bigger or deeper chip.
Old 02-12-24, 09:28 AM
  #18  
Longwaldo
Pit Crew
 
Longwaldo's Avatar
 
Join Date: Jun 2023
Location: GA
Posts: 160
Received 79 Likes on 49 Posts
Default

Originally Posted by arentz07
I have a couple of chips on my driver's side doors - one on the front and one on the rear. I honestly think the rear door is due to the fact that I had it repainted at a body shop and not of the same quality as the original paint. The front door, not sure. I've not gotten up the courage to go through with touch-up paint yet. I am afraid of making it look worse.
It could have been. I have seen cars have up to $45k in damage sold as new when I worked at Ford in the UK.
Old 02-12-24, 10:19 AM
  #19  
Benibiker1558
Intermediate
 
Benibiker1558's Avatar
 
Join Date: Aug 2023
Location: Hawaii
Posts: 377
Received 398 Likes on 178 Posts
Default

Originally Posted by jororo
Noticing a couple spots where the paint’s clear coat appears to already be giving way, particularly on the hood in two spots close to each other (circled in yellow on photos below).

Anyone else having these issues? Car is garage parked and has never had bird droppings or the like on it, and at worst only sees touchless car washes. Oddest part is these are areas nobody would ever touch but it looks and feels like somebody else put their thumbs on the clear coat before it dried.




This should be covered under the 4 year/50,000 mile warranty, no? Least they can do is get it repainted for you.
Old 02-12-24, 11:26 AM
  #20  
macmaster
Pole Position
 
macmaster's Avatar
 
Join Date: Dec 2010
Location: SoCal
Posts: 2,798
Received 1,971 Likes on 1,055 Posts
Default

Ugh, paint issues like this is a nightmare. Theres little to nothing you can do other than respraying the whole panel.
Old 02-12-24, 01:19 PM
  #21  
howard500
Rookie
iTrader: (1)
 
howard500's Avatar
 
Join Date: Jan 2023
Location: CA
Posts: 25
Received 18 Likes on 10 Posts
Default

Mine has paint issues such as lint trapped in the paint. Also bubbles on the roof paint where it meets the A thru C pillar area. Not sure how it even got past quality control with this much lint.
Old 02-13-24, 08:05 PM
  #22  
FLXYLXY
Pit Crew
 
FLXYLXY's Avatar
 
Join Date: Oct 2023
Location: California
Posts: 117
Received 120 Likes on 36 Posts
Default

Pretty sure that’s from the touchless wash. I’d t have a good detail guy take care of it . Maybe good time to do a 2 step correction.

those touchless can still cause damage to the paint and plastics
Old 02-14-24, 04:41 PM
  #23  
jororo
Intermediate
Thread Starter
 
jororo's Avatar
 
Join Date: Dec 2021
Location: ID
Posts: 499
Received 788 Likes on 283 Posts
Default

Originally Posted by FLXYLXY
Pretty sure that’s from the touchless wash. I’d t have a good detail guy take care of it . Maybe good time to do a 2 step correction.

those touchless can still cause damage to the paint and plastics
It’d be incredibly difficult to imagine a touchless car wash doing this. Nowhere near enough PSI to strip off properly applied clear coat.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rwmnau
ES - 5th Gen (2007-2012)
6
03-03-22 07:55 PM
jeverett72
GS - 4th Gen (2013-2020)
21
08-07-21 08:50 AM
ale037
IS - 2nd Gen (2006-2013)
3
08-25-19 07:34 AM
MarcusMIA
SC- 1st Gen (1992-2000)
4
09-20-09 07:43 PM
nighthawk
IS - 2nd Gen (2006-2013)
11
06-03-06 02:16 PM



Quick Reply: Others having paint issues?



All times are GMT -7. The time now is 09:33 AM.