When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For those who asked for more photos Made a new design of seats of RCF. Original seats of RCF. Nice picture=) printed out the settings of your machine for exhibition Engine V8 in my car.
^^^^What do you mean Those wheels are stock GSF wheels I'm running modified RCF base wheels on my ISF.
Lou
I was referencing an earlier post. Look below.
Originally Posted by beezmarkee
Rear axle wheels: BBS RC F, 10J +42, 265/30 R19 (275 is too big for fenders)
And this is incorrect, 19 x 10 +42 will work with a 275 with super minimal rubbing on wide-running tires, and no rubbing at all on skinny-running tires.
^^^^OK, BTW RCF wheels have the same dimensions as GSF wheels. And 42mm is incorrect. RCF and GSF rear wheels have an offset of 41mm. As I said I'm running modified RCF wheels on my ISF with 295/30/19 Bridgeston SD-04s. My rear wheels have 5mm shaved from the hub making the new offset 46mm. My fenders are rolled flat and since the modification I do not rub.
^^^^OK, BTW RCF wheels have the same dimensions as GSF wheels. And 42mm is incorrect. RCF and GSF rear wheels have an offset of 41mm. As I said I'm running modified RCF wheels on my ISF with 295/30/19 Bridgeston SD-04s. My rear wheels have 5mm shaved from the hub making the new offset 46mm. My fenders are rolled flat and since the modification I do not rub.
Lou
Not to turn this into a fitment thread, but isn't the ISF much different fitment from the IS?