IS 500 aftermarket exhausts
#737
#738
Dude used to drive a Prius. He's still getting used to having a real car.
#739
#741
#742
#743
Fourth of July savings for exhausts. Apexi and Toms!
Contact us!
-Josh
Contact us!
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#745
Message or text me please, we need some specifics!
-Josh
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
#746
#747
Anyone know what voltage the valves require on the RR Racing Bazooka system?
I saw a post indicating a splice into the baby blue wire in the amp harness was necessary. Thought I remember RR racing saying it's an external hookup without splicing.
Can anyone who has the system comment? I'm going to take apart the trunk panels and probe around a bit tomorrow.
I saw a post indicating a splice into the baby blue wire in the amp harness was necessary. Thought I remember RR racing saying it's an external hookup without splicing.
Can anyone who has the system comment? I'm going to take apart the trunk panels and probe around a bit tomorrow.
#748
Anyone know what voltage the valves require on the RR Racing Bazooka system?
I saw a post indicating a splice into the baby blue wire in the amp harness was necessary. Thought I remember RR racing saying it's an external hookup without splicing.
Can anyone who has the system comment? I'm going to take apart the trunk panels and probe around a bit tomorrow.
I saw a post indicating a splice into the baby blue wire in the amp harness was necessary. Thought I remember RR racing saying it's an external hookup without splicing.
Can anyone who has the system comment? I'm going to take apart the trunk panels and probe around a bit tomorrow.
#749
I poked around to see for myself today. Yeah it's definitely not an "external" lead on the amplifier with a screw terminal or something. It's a pinned connector. I don't know where that started.
"It's just a + and - lead and you hook it up." I guess, but it's really a wire t-tap.
For $3000 you think they would have snapped a few pictures during installs at their shop to include exactly which wire to tap. I asked them for a doc with instructions and they replied they don't have any lol. Maybe I'm just being a drama queen.
Still, I'm going to order mine tomorrow because they're the only ones to offer a non-vacuum driven valve system. Safe to assume they don't include any wire taps or anything?
"It's just a + and - lead and you hook it up." I guess, but it's really a wire t-tap.
For $3000 you think they would have snapped a few pictures during installs at their shop to include exactly which wire to tap. I asked them for a doc with instructions and they replied they don't have any lol. Maybe I'm just being a drama queen.
Still, I'm going to order mine tomorrow because they're the only ones to offer a non-vacuum driven valve system. Safe to assume they don't include any wire taps or anything?
Last edited by zman21; 07-02-23 at 05:30 PM.
The following users liked this post:
FI4runner (07-05-23)
#750
They read the forums every once in a while, maybe they'll listen to your suggestion! A little more installation help would be nice. Even if you don't install yourself it would be good info to give to a shop doing the install so nothing gets messed up.
The following users liked this post:
FI4runner (07-05-23)