IS 500 aftermarket exhausts
09-02-23 | 10:05 AM
#871
FYI, Apexi resonated midpipes are pretty much sold out til November, we have non resonated that will be available.
GTHAUS should be in stock all variants.
Tom's IS500 axle backs are good in stock but the RCF version is out til Nov-Dec.
Other brands we can order as well.
-Josh
GTHAUS should be in stock all variants.
Tom's IS500 axle backs are good in stock but the RCF version is out til Nov-Dec.
Other brands we can order as well.
-Josh
__________________
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
Your #1 Dealer for Aftermarket Performance Products
Orange County, CA
Email: info@merakiautoworks.com
Text/Call: 213 394 2886
Website: www.MerakiAutoworks.com
09-03-23 | 03:29 AM
#872
Driver
Joined: Jun 2023
Posts: 52
Likes: 113
From: ON
their Facebook has some information but I couldn’t see anything on their main website.
their full exhaust systems are very expensive usually.
I am praying HKS comes out with a super sound master system but that seems like a pipe dream.
Nothing so far has really gotten me super jazzed. Exhaust systems seem to be getting prohibitively expensive. I’m considering exploring a custom valved setup from a local shop but haven’t been in any rush.
Facebook Post
their full exhaust systems are very expensive usually.
I am praying HKS comes out with a super sound master system but that seems like a pipe dream.
Nothing so far has really gotten me super jazzed. Exhaust systems seem to be getting prohibitively expensive. I’m considering exploring a custom valved setup from a local shop but haven’t been in any rush.
09-03-23 | 04:59 AM
#873
Pit Crew
Joined: Jun 2023
Posts: 145
Likes: 122
From: CA
I had the same experience with my TOMs axel back. Sounds great past 2K, but cruising on FWY speeds in 8th gear is where I notice drone the most. Had it installed locally at APEXi, let's just say it received some unwanted attention 5 minutes afterwards. Currently back to stock, I might have to let go of the axel back and just go with the APEXi resonated mid-pipe.
The following users liked this post:
Caspr (09-11-23)
09-07-23 | 04:59 PM
#875
Driver
Joined: Jun 2023
Posts: 52
Likes: 113
From: ON
If I’m translating this correctly, the price for the NOVEL exhaust is 877,800 yen which is $5956USD / $8151CAD
https://ameblo.jp/revel-motor-sports...d_iFag-kGeJGnM
https://ameblo.jp/revel-motor-sports...d_iFag-kGeJGnM
The following 2 users liked this post by 808c2s:
604GSE21 (09-07-23),
SonicRob99 (09-15-23)
09-07-23 | 09:06 PM
#878
Instructor
Joined: Apr 2013
Posts: 997
Likes: 404
From: Vancouver, BC
If I’m translating this correctly, the price for the NOVEL exhaust is 877,800 yen which is $5956USD / $8151CAD
https://ameblo.jp/revel-motor-sports...d_iFag-kGeJGnM
https://ameblo.jp/revel-motor-sports...d_iFag-kGeJGnM
09-14-23 | 12:57 PM
#879
Pit Crew
Joined: Jul 2023
Posts: 106
Likes: 75
From: CA
just had the apexi resonated mid pipe installed, but still running stock axle back and it’s still very quiet. Need to find time to swap back to the Tom’s axle back with the midpipe to see if it made the drone worse. but either way I have an appointment in October to have some j-pipes fabbed and welded in place to try to tune out the drone so will keep you posted.
09-14-23 | 04:01 PM
#880
Advanced
Joined: Nov 2012
Posts: 560
Likes: 277
From: St. Louis
just had the apexi resonated mid pipe installed, but still running stock axle back and it’s still very quiet. Need to find time to swap back to the Tom’s axle back with the midpipe to see if it made the drone worse. but either way I have an appointment in October to have some j-pipes fabbed and welded in place to try to tune out the drone so will keep you posted.
09-14-23 | 04:28 PM
#881
Advanced
Joined: Jul 2023
Posts: 645
Likes: 499
From: AZ
just had the apexi resonated mid pipe installed, but still running stock axle back and it’s still very quiet. Need to find time to swap back to the Tom’s axle back with the midpipe to see if it made the drone worse. but either way I have an appointment in October to have some j-pipes fabbed and welded in place to try to tune out the drone so will keep you posted.