When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Windows up. Yeah, it's pretty much OEM like when you are not on the throttle.
So between 1k - 3k you don't hear much of a difference? That's my main gripe, with the exhaust note, it's practically silent in the lower RPM's and during start up.
So between 1-3k you don't hear much of a difference? That's my main gripe, with the exhaust note, it's practically silent in the lower RPM's and during start up.
Between 2-3K rpm you can hear a low burble like sound. Once 3K and above, the V8 wakes up with a higher frequency wail like sound. Below 2k, it's essentially OEM.
Received my Revel Medallion axel back from Meraki yesterday and installed today. The two bolts closest to the skid plates are a pain to take off and on since it was so tight. Literally only have 2 inches of room to move my wrench. Took forever to take these off.
Initial start up, this thing is loud. My garage door was vibrating/resonating. I had down pipes and catback exhaust on my previous car and that was not nearly as loud as this on start up, but the tone is really deep and throaty. Once it settled, it was just a touch louder than stock. Drove around the block to confirm everything was good and it was much more audible than stock. Much more growl when accelerating. Still in break in period so didn't go above 4k rpm, can't wait to hear her scream once break in is done.
Received my Revel Medallion axel back from Meraki yesterday and installed today. The two bolts closest to the skid plates are a pain to take off and on since it was so tight. Literally only have 2 inches of room to move my wrench. Took forever to take these off.
Initial start up, this thing is loud. My garage door was vibrating/resonating. I had down pipes and catback exhaust on my previous car and that was not nearly as loud as this on start up, but the tone is really deep and throaty. Once it settled, it was just a touch louder than stock. Drove around the block to confirm everything was good and it was much more audible than stock. Much more growl when accelerating. Still in break in period so didn't go above 4k rpm, can't wait to hear her scream once break in is done.
That's a pretty interesting guarantee, I'm excited to see how it goes, the borla on my F had a bit of a drone, but was not terrible. Sounded so great under WOT.
That's a pretty interesting guarantee, I'm excited to see how it goes, the borla on my F had a bit of a drone, but was not terrible. Sounded so great under WOT.
Yeah I'm excited too. My brother has the GM Borla exhaust on his AT4X and there is no drone. It's pretty loud on start up, but while driving it isn't crazy and zero drone.
11-04-23 | 08:52 AM
