IS500 Picture Thread
#1096
Are you putting car seats in your 500? If so, how do they fit? Asking for a friend 😅
Best thing we did was give up on our Evenflo, Graco and Britax car seats and switch to the Diono 3-across car seats. So much easier to get the young ones plopped down and seat belts clipped.
The following users liked this post:
Kanpai (01-15-23)
#1097
Ya actually have two in there right now. They fit just fine without any real need to adjust driver’s seat (if we have our forward facing car seat behind the driver).
Best thing we did was give up on our Evenflo, Gracie and Britax car seats and switch to the Diono 3-across car seats. So much easier to get the young ones plopped down and seat belts clipped.
Best thing we did was give up on our Evenflo, Gracie and Britax car seats and switch to the Diono 3-across car seats. So much easier to get the young ones plopped down and seat belts clipped.
#1098
If it’s hard to use the display model in a well lit store on a motionless stuffed animal, well, you and your better half are going to be having constant yellfests when it’s cold & raining outside and you’re awkwardly hunched over trying to get your baby safely seated while parallel parked on a busy road. Hypothetically speaking, of course.
The following users liked this post:
Kanpai (01-15-23)
#1099
i just put 2 in my rear seats for my 4 and 2 year old. Big Britax ones that go rear and forward facing. Both my boys are forward facing at this point at least. I’m 6’ and try and ride locked in, but even if I lean back they have plenty of room.
The following users liked this post:
Kanpai (01-15-23)
#1100
Pole Position
I don’t remember seeing one, but I’ll go check!
#1101
We are having our first GREAT Grandchild in September. Congrats to u all, gifts from above!
The following users liked this post:
giS (01-15-23)
#1102
Pole Position
#1106
jmull love the selbon carbon great contrast with the blue, wont look so great with my Infrared. Nice touch.
#1107
Hood/Vents
how did you install the vents or did the hood come with the vents? I ordered a hood, but received it with some damage during shipment. I have a replacement in route, but it will take a while…4-8 Weeks. I didn’t see a vented hood for the IS500 on their website, so I assume you installed it yourself…
#1108
Instructor
iTrader: (1)
how did you install the vents or did the hood come with the vents? I ordered a hood, but received it with some damage during shipment. I have a replacement in route, but it will take a while…4-8 Weeks. I didn’t see a vented hood for the IS500 on their website, so I assume you installed it yourself…
The following 11 users liked this post by Velobrew:
08sgmis350 (02-15-23),
arentz07 (01-18-23),
DLPTony (01-18-23),
GoHorns (01-18-23),
Grecian5 (01-19-23),
and 6 others liked this post.