lowering rear of 2010 IS250C
#1
Driver School Candidate
Thread Starter
Join Date: Jun 2007
Location: fla
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
lowering rear of 2010 IS250C
What would be the easiest way to lower my ISC 2-4 inches in the rear only.
The car sits a little too high for me.
Thanks
The car sits a little too high for me.
Thanks
#2
Fire Slayer
iTrader: (16)
To be able to lower your car that much you'd need coilover springs in the back. Not sure if they are sold in pairs. Some brands of adjustable coils are KW, Megan, Tein, BCR, and a few others. You could put air ride in the rear only, but you'll need an air tank in your trunk.
#6
Driver School Candidate
Thread Starter
Join Date: Jun 2007
Location: fla
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Just trying to make the car look a little better. It seems to be sitting a little too high in the back but that's the way Lexus makes it. But a little lower would look a lot cooler.
Thanks for all the replies
Thanks for all the replies
Trending Topics
#9
Lexus Fanatic
iTrader: (51)
You're goign to need to buy a full set of springs or coilovers either way you go, so you might as well do front and rear.
Coiovers will allow you to adjust the height to where you want it. Might be the best route for what it sounds like you want.
If you want some help feel free to shoot us a PM
Coiovers will allow you to adjust the height to where you want it. Might be the best route for what it sounds like you want.
If you want some help feel free to shoot us a PM
#11
Lexus Champion
iTrader: (1)
Drop only in the rear? the front stock has an awful lot of wheel gap, like 4-6 inches. I forget what it is but is nasty compared to the rear. If you want a static drop, go coils like the others have said. The coilovers for the sedans will work with the vert.
GL, and post some pics.
GL, and post some pics.
Thread
Thread Starter
Forum
Replies
Last Post