MHP Longtube Headers
#61
Racer
iTrader: (3)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Here's a dyno graph from today's session with our LTs and off-road mids compared to before with Filters, Thermalnators, ECU/TCU tuning. All runs done in 5th gear on 93 octane with SAE correction, smoothing set at 5. You can see via the graph that on today's run there was a lack of airflow up top (only one fan was working).
We'll run the car at MIR before adding the 3" catback.
![](http://i145.photobucket.com/albums/r206/Fourcam330/MHPStage1vStage2.jpg)
As you can see previously we were just under 400rwtq most of the curve with a peak of 402rwtq--over 400rwtq from 4900-5000rpm. We now make 400rwtq+ from 3100rpm-6000rpm peaking at 435rwtq @5100rpm. HP now peaks at 6100rpm with 462rwhp on tap (previously 436rwhp@6300rpm)
Previously we made 300rwhp+ from 4000rpm, now we make 300rwhp+ from 3800rpm.
Previously we made 350rwhp+ from 4700rpm, now we make 350rwhp+ from 4400rpm.
Previously we made 400rwhp+ from 5300rpm, now we make 400rwhp+ from 4900rpm+.
Peak gains are 26rwhp/33rwtq (with the stock catback still in place) with huge gains in average horsepower and torque. We expect 480rw SAE in 5th gear on straight 93 with our catback added, and close to 500rw SAE on 100 (with the same tune).
A/F was nice and safe in the low to mid 12s after 4000rpm.
We'll run the car at MIR before adding the 3" catback.
![](http://i145.photobucket.com/albums/r206/Fourcam330/MHPStage1vStage2.jpg)
As you can see previously we were just under 400rwtq most of the curve with a peak of 402rwtq--over 400rwtq from 4900-5000rpm. We now make 400rwtq+ from 3100rpm-6000rpm peaking at 435rwtq @5100rpm. HP now peaks at 6100rpm with 462rwhp on tap (previously 436rwhp@6300rpm)
Previously we made 300rwhp+ from 4000rpm, now we make 300rwhp+ from 3800rpm.
Previously we made 350rwhp+ from 4700rpm, now we make 350rwhp+ from 4400rpm.
Previously we made 400rwhp+ from 5300rpm, now we make 400rwhp+ from 4900rpm+.
Peak gains are 26rwhp/33rwtq (with the stock catback still in place) with huge gains in average horsepower and torque. We expect 480rw SAE in 5th gear on straight 93 with our catback added, and close to 500rw SAE on 100 (with the same tune).
A/F was nice and safe in the low to mid 12s after 4000rpm.
![Woot](https://www.clublexus.com/forums/images/smilies/woot.gif)
#62
Pole Position
Thread Starter
Join Date: Nov 2008
Location: OH
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Can't wait to hit the track on the 23rd. Our overseas trip got pushed back to this Sat (7-10 days) as the list keeps growing; meaning we have to spend more time getting base cals ready for different vehicles.
Yes, we'll have packages available for the IS-F soon including headers, tuning, T-stats, etc.
Prepping for this trip is killing us, but after the jet lag ends we'll begin work on the IS-F LTs.
Thanks!
#64
#65
Lexus Champion
iTrader: (5)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I tried, I PM'ed Luis (I think that's the name of the guy that was running the GB) plenty of times because I had a problem with his website, it didn't want to take my order because of my shipping address, but he never asnwered and the GB ended. I guess I'll have to wait until the next GB.
#71
Lexus Champion
#72
Tech Info Resource
![](https://www.clublexus.com/forums/images/ranks/rank-smod2.gif)
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Guys - be patient - first, we don't know if anyone has volunteered their F for fabrication, second, it's going to be a very tight fit. There's not much room for the exhaust in our cars as it is. Squeezing four tubes and a decent collector with a high flow cat into the available space is no small feat. Add to this the O2 sensors still need to be connected and working and you've got a pretty tough bill to fill. Give them a chance and some time to get it done and done right. It will be worth the wait if it can be done.
#74
Tech Info Resource
![](https://www.clublexus.com/forums/images/ranks/rank-smod2.gif)
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
It could pass inspection in a lot of states, just not California. If there are working cats, then you don't need to play games with O2 simulators - testing this technology on the IS350s equipped with Mazzuri's header was very frustrating for a few owners who had recurring CELs because the ECM is a little smarter than the O2 simulator. If you have a cat, you'll not have to fool anything.
#75
Lead Lap
iTrader: (3)
Join Date: Mar 2009
Location: GA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'm debating going ahead and ordering the JoeZ exhaust of waiting till the full Longtube Headers are out, cause they they might have an exhaust that might work better with them than the JoeZ exhaust...
ohh decisions =(
ohh decisions =(