Coming soon...
#136
Lexus Test Driver
Thread Starter
Join Date: Oct 2008
Location: FL-561,352
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
As for the lift - I LIKE the stance how it is... it's not that I *can't* get it raised, it's that I won't.
I actually did get it raised 1/4" when I had the recent work done. It doesnt rub at all anymore, but I swear it looks an inch higher.
#139
Lexus Test Driver
Thread Starter
Join Date: Oct 2008
Location: FL-561,352
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
Have a major leak and bottle remote controls are not working..
Took the car to the track. Ran fine the way there, then took a dump on the track.
Took the car to the track. Ran fine the way there, then took a dump on the track.
#140
#141
Driver School Candidate
Join Date: Jun 2008
Location: Arizona
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
That's exactly what it sounds like. Too much Torque Converter slip and the car cuts fuel. Almost all automagic tranny cars do it these days. I have a diesel truck that puts out over 500hp and 1100tq to the wheels, and once the TC starts slipping a certain number of RPM's, it will cut all fuel to save itself.
#144
Lexus Test Driver
Thread Starter
Join Date: Oct 2008
Location: FL-561,352
Posts: 1,099
Likes: 0
Received 0 Likes
on
0 Posts
Sorry, been busy... was at NSCRA all day yesterday. Got the car back on Friday, intended to track it yesterday but was honestly too hot out and was feeling lazy.
Leak(s) repaired, car is running great so far...have requested a proper dyno printout so I can provide it to you guys.
I also have my DR's mounted on IS350 18x8.5's. Again, was going to run on Sunday but didnt. Hopefully will get to run on Wednesday or Friday. I'm honestly a little scared of what may happen when the transmission has to deal with actual grip.
Leak(s) repaired, car is running great so far...have requested a proper dyno printout so I can provide it to you guys.
I also have my DR's mounted on IS350 18x8.5's. Again, was going to run on Sunday but didnt. Hopefully will get to run on Wednesday or Friday. I'm honestly a little scared of what may happen when the transmission has to deal with actual grip.
Last edited by oztiks; 10-05-09 at 11:26 AM.
#145
Racer
iTrader: (3)
sorry, been busy... Was at nscra all day yesterday. Got the car back on friday, intended to track it yesterday but was honestly too hot out and was feeling lazy.
Leak(s) repaired, car is running great so far...have requested a proper dyno printout so i can provide it to you guys.
I also have my dr's mounted on is350 18x8.5's. Again, was going to run on sunday but didnt. Hopefully will get to run on wednesday or friday. I'm honestly a little scared of what may happen when the transmission has to deal with actual grip.
Leak(s) repaired, car is running great so far...have requested a proper dyno printout so i can provide it to you guys.
I also have my dr's mounted on is350 18x8.5's. Again, was going to run on sunday but didnt. Hopefully will get to run on wednesday or friday. I'm honestly a little scared of what may happen when the transmission has to deal with actual grip.
#146
11 Second Club
iTrader: (2)
Sorry, been busy... was at NSCRA all day yesterday. Got the car back on Friday, intended to track it yesterday but was honestly too hot out and was feeling lazy.
Leak(s) repaired, car is running great so far...have requested a proper dyno printout so I can provide it to you guys.
I also have my DR's mounted on IS350 18x8.5's. Again, was going to run on Sunday but didnt. Hopefully will get to run on Wednesday or Friday. I'm honestly a little scared of what may happen when the transmission has to deal with actual grip.
Leak(s) repaired, car is running great so far...have requested a proper dyno printout so I can provide it to you guys.
I also have my DR's mounted on IS350 18x8.5's. Again, was going to run on Sunday but didnt. Hopefully will get to run on Wednesday or Friday. I'm honestly a little scared of what may happen when the transmission has to deal with actual grip.