Originally Posted by k20trick

For the record, when all the way down it does hit the top portion of the shifter trim so be careful guys/girls.

Also if you go too far down the cf will split on the shift **** so be aware of that as well. Basically dont go too far and when you feel resistance of cf coming apart (glued on), stop there and dont go any further.

With that being said, it does feel a lot better to have the shifter sit lower, but it wasn't meant to be installed that way so use caution when screwing the shifter all the way down as far as possible.

Originally Posted by flowrider

Where I have had it for the last 9+ years it does NOT hit anything And, of course you need to be prudent when screwing it down

Lou