When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Car looks great but you can tell that the bumper was repainted...it seems to be a shade or two too light. But then again, from my experience with pearl white cars, it's a pain in the a$$ to get the color just right. BTW, who made the custom cold air box for you?...Darshana S...
dang dude... VERY observant!!!
yes, the bumper is a shade lighter...
i did it cause of the holes the previous owner had for the front plate...and there was some scratches here and there... i might get it resprayed...not sure yet tho...
as for the airbox and intake tube...my friend manufactures parts so we fab'd this one up for the show. we're still doing some tests to get it just right
if there's any input on it, let me know. we're thinking about mass producing these but not sure if it will sell or not...
some ppl have been asking me more about the LEDs...here's one more angle... you can see the refelction on the top showing where the LEDs are...the strip is adhered to the inside of the vent and the LEDs are shining straing into the fender...during the day or when they're off, you can't tell they're even there unless you run your finger inside the vent. also, they don't block any airflow at all...
some ppl have been asking me more about the LEDs...here's one more angle... you can see the refelction on the top showing where the LEDs are...the strip is adhered to the inside of the vent and the LEDs are shining straing into the fender...during the day or when they're off, you can't tell they're even there unless you run your finger inside the vent. also, they don't block any airflow at all...
u've used slighthly diff leds then me... mine actually runs from the top to the bottom and in the day time i can actually c it on and off from outside