anajri

hey
this is my post to try and help with any info on making the IS-F faster...

just recieved and intalled que FMC(fuel map controller) .. as soon as I have a chance will try and tune it and dyno and see if anything good come out of this..

here are some pics
again actual mods are Just in case
Joez intake and pts exhaust
toms filter

To install it in the glove box I had to buy the extension.. cause if not, it would have to stay in the engine bay with a plastic cover it brings.. Once installed in the Intake, I had to remove the battery and tread the cable through a little hole in the firewall and into the glove box. Then place it down with a doble sided tape that the FMC brings..
AS i have been told Stock air fuel ratio is close to 10 (way Rich) especially right after shifting. With this, I'm hoping I can bring the air fuel ration back up, close to 12 and see if it releases a few ponies. (correct me if I'm mistaken)

Anyone done this before?
ALf

MRISF

iTrader: (4)

very interesting...keep me posted i am liking this.
where did you get the controller and how much?

MRxSLAYx

Great DIY! Keep us posted. If the results are strong ill place an order. Looking forward to the followup

n0th1ng

iTrader: (9)

Hey
How much was this? and how much power are you actually expecting from this??

anajri

I actually do not know how much power to expect..
this was about 550 bucks including the extension and shipping...

but if i get 10-12 hp mid rage or peak hp i'll be happy.... if this does not work a 50-80 nos shot will be in the works.. hjeheh

alf

maxnix

One reason OEM calculated maps are rich on acceleration and shifting is to prevent pinging form inferior fuels and for cooling. You will have to find about 10% increase in torque peak to notice any difference.

Joe Z

iTrader: (10)

Very nice..!!!

We installed one of these on our 2010 IS350 C - SEMA Build by VIP Auto Salon Inc.

I used a thicker black wire loom to hide all the funny color wiring.. When I was done, it looked stock..

We are waiting to get one of these TOM'S units into an IS-F..

Anxoius to see the results in conjuction with the exhaust & intake.

Regards,
Joe Z

anajri

nice... did you get any gains on th IS350......?

juice14

Good luck with this project