Complete IS-F Brake Thread (Under-construction)
#422
Lexus Test Driver
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
-Mike
#423
Tech Info Resource
![](https://www.clublexus.com/forums/images/ranks/rank-smod2.gif)
iTrader: (2)
#424
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
lobuxracer - it sounds like you speak highly of the HC+800. What are your thoughts on the noise level of these pads? Do they squeal any? I currently have the Winmax W2 and while I think they are a decent street pad, they are starting to make a lot if noise. I've had them for about 2 years and have worn them down about 70% (wear indicators are not touching the rotors). Since I put them on, they were quite as can be, but now they are making all kinds of noise!
#425
#427
#428
Tech Info Resource
![](https://www.clublexus.com/forums/images/ranks/rank-smod2.gif)
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
lobuxracer - it sounds like you speak highly of the HC+800. What are your thoughts on the noise level of these pads? Do they squeal any? I currently have the Winmax W2 and while I think they are a decent street pad, they are starting to make a lot if noise. I've had them for about 2 years and have worn them down about 70% (wear indicators are not touching the rotors). Since I put them on, they were quite as can be, but now they are making all kinds of noise!
#429
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
if noise bothers you, the HC+800 isn't likely a good choice. They occasionally make a grinding noise that sounds really ugly at low speeds. It's when the transfer layer is wearing off. I like the feel so much, I won't change them but I also won't say they are noise free unless you are really diligent with the bedding process and don't mind repeating it a few times over the life of the pads.
#430
Racer
iTrader: (5)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have the HC+800 all around, just as Lance stated, I have the same experience with occasional grinding noise, the rear is somehow completely silent.
I currently have an awesome experience with the Ferodo DS2500 on my Cayenne GTS. The pad is very strong with an exceptional feel and zero noise.
So for my ISF, as soon as my front HC+800 pads are shot, I will go with the same setup Lou has. Ferodo DS2500 in the font and continue having the Project Mu HC+800 in the rear.
I find it to be the ultimate setup performance-wise without the grinding sound and I believe much easier on my 2pc rotors. BTW, the dust level on the Project mu is off the charts,
which I don't really care about as I choose performance over dust, but it is insane just so you know. On the other hand, Ferodo DS2500 are somewhat less dust than OEM to my personal surprise.
I currently have an awesome experience with the Ferodo DS2500 on my Cayenne GTS. The pad is very strong with an exceptional feel and zero noise.
So for my ISF, as soon as my front HC+800 pads are shot, I will go with the same setup Lou has. Ferodo DS2500 in the font and continue having the Project Mu HC+800 in the rear.
I find it to be the ultimate setup performance-wise without the grinding sound and I believe much easier on my 2pc rotors. BTW, the dust level on the Project mu is off the charts,
which I don't really care about as I choose performance over dust, but it is insane just so you know. On the other hand, Ferodo DS2500 are somewhat less dust than OEM to my personal surprise.
#431
Former Sponsor
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have the HC+800 all around, just as Lance stated, I have the same experience with occasional grinding noise, the rear is somehow completely silent.
I currently have an awesome experience with the Ferodo DS2500 on my Cayenne GTS. The pad is very strong with an exceptional feel and zero noise.
So for my ISF, as soon as my front HC+800 pads are shot, I will go with the same setup Lou has. Ferodo DS2500 in the font and continue having the Project Mu HC+800 in the rear.
I find it to be the ultimate setup performance-wise without the grinding sound and I believe much easier on my 2pc rotors. BTW, the dust level on the Project mu is off the charts,
which I don't really care about as I choose performance over dust, but it is insane just so you know. On the other hand, Ferodo DS2500 are somewhat less dust than OEM to my personal surprise.
I currently have an awesome experience with the Ferodo DS2500 on my Cayenne GTS. The pad is very strong with an exceptional feel and zero noise.
So for my ISF, as soon as my front HC+800 pads are shot, I will go with the same setup Lou has. Ferodo DS2500 in the font and continue having the Project Mu HC+800 in the rear.
I find it to be the ultimate setup performance-wise without the grinding sound and I believe much easier on my 2pc rotors. BTW, the dust level on the Project mu is off the charts,
which I don't really care about as I choose performance over dust, but it is insane just so you know. On the other hand, Ferodo DS2500 are somewhat less dust than OEM to my personal surprise.
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
-Matt M.
#432
#433
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have the HC+800 all around, just as Lance stated, I have the same experience with occasional grinding noise, the rear is somehow completely silent.
I currently have an awesome experience with the Ferodo DS2500 on my Cayenne GTS. The pad is very strong with an exceptional feel and zero noise.
So for my ISF, as soon as my front HC+800 pads are shot, I will go with the same setup Lou has. Ferodo DS2500 in the font and continue having the Project Mu HC+800 in the rear.
I find it to be the ultimate setup performance-wise without the grinding sound and I believe much easier on my 2pc rotors. BTW, the dust level on the Project mu is off the charts,
which I don't really care about as I choose performance over dust, but it is insane just so you know. On the other hand, Ferodo DS2500 are somewhat less dust than OEM to my personal surprise.
I currently have an awesome experience with the Ferodo DS2500 on my Cayenne GTS. The pad is very strong with an exceptional feel and zero noise.
So for my ISF, as soon as my front HC+800 pads are shot, I will go with the same setup Lou has. Ferodo DS2500 in the font and continue having the Project Mu HC+800 in the rear.
I find it to be the ultimate setup performance-wise without the grinding sound and I believe much easier on my 2pc rotors. BTW, the dust level on the Project mu is off the charts,
which I don't really care about as I choose performance over dust, but it is insane just so you know. On the other hand, Ferodo DS2500 are somewhat less dust than OEM to my personal surprise.
#435
Driver School Candidate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
So, I probably wont need new rotors for a little longer, but I am trying to have everything ready so that I dont have to scramble to get parts when the time comes. I have been trying to shop around and look at the different rotor options, but I am not finding a whole lot. Right now, I am just running the stock rotors and project Mu ns-400 pads. I have about 15k miles on those pads so far and I absolutely love them. They never make a sound and I dont have anywhere near the dusting issues I did with the OEM pads. I plan to continue running those and I just recently ordered a new set for a pretty amazing price (thanks to Lou from ModInJapan).
I have no complaints with the stock rotors and I think they look pretty great, but I cant seem to find replacements online and I am sure that a lexus dealership would mark them up outrageously. Does anyone know the part numbers for those or where I could get my hands on them?
I am also completely open to suggestions for aftermarket rotors. I know a lot of you guys are running the figs 2-piece setup, but I wasn't really planning on spending 2grand+ on rotors. I know there is a pretty substantial weight reduction, but I am not really sure that these would be necessary for my daily driving purposes.
any suggestions are greatly appreciated.
I have no complaints with the stock rotors and I think they look pretty great, but I cant seem to find replacements online and I am sure that a lexus dealership would mark them up outrageously. Does anyone know the part numbers for those or where I could get my hands on them?
I am also completely open to suggestions for aftermarket rotors. I know a lot of you guys are running the figs 2-piece setup, but I wasn't really planning on spending 2grand+ on rotors. I know there is a pretty substantial weight reduction, but I am not really sure that these would be necessary for my daily driving purposes.
any suggestions are greatly appreciated.
The following users liked this post:
ModInJapan (06-27-17)