Complete IS-F Brake Thread (Under-construction)
#452
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I just installed the MX72's. Absolute great performance pad, but for some reason, mine squeal like a pig. I'm told that they are normally quiet, but not the case for me. I'm going to take the brakes apart this weekend, clean them real good and put them back together to see if it fixes the noise. We'll see. I really want them to quiet down because you truly can't beat the performance of these things!
#453
Former Sponsor
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
^^ They should not be making any crazy noises like that. I still think this comes down to a bedding issue that will work itself out after getting some more miles on the brakes and perhaps a few more good heat cycles. I'll keep in touch and I'm sure we'll get it sorted out sooner than later.
-Matt M.
-Matt M.
#454
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Hey Matt! During my trip to Vegas, I did several aggressive braking cycles that got them nice and hot. The good thing about the long road trip was that after getting them nice and hot, I was able to drive normally for long periods of time so that they had a chance to naturally cool on their own. Unfortunately, after all that, it seems like the sound got louder. The good thing is, I think I have narrowed it down to just the rears making noise. That's why I'm going to take them apart, clean them, regrees them and put them back together.
#455
Former Sponsor
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Hey Matt! During my trip to Vegas, I did several aggressive braking cycles that got them nice and hot. The good thing about the long road trip was that after getting them nice and hot, I was able to drive normally for long periods of time so that they had a chance to naturally cool on their own. Unfortunately, after all that, it seems like the sound got louder. The good thing is, I think I have narrowed it down to just the rears making noise. That's why I'm going to take them apart, clean them, regrees them and put them back together.
-Matt M.
#457
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I just installed the MX72's. Absolute great performance pad, but for some reason, mine squeal like a pig. I'm told that they are normally quiet, but not the case for me. I'm going to take the brakes apart this weekend, clean them real good and put them back together to see if it fixes the noise. We'll see. I really want them to quiet down because you truly can't beat the performance of these things!
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
Hopefully what Matt said above will help out? with some time and a better transfer layer on the rear rotors hopefully it'll go away.
Mine are silent about 95% of the time every once in a while I'll get a little squeal but it's not a big deal because it's so rare to hear anything from these pads.
#458
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Interesting???.....I never had any issues with my sets of MX-72s over the last couple years with squealing![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
Hopefully what Matt said above will help out? with some time and a better transfer layer on the rear rotors hopefully it'll go away.
Mine are silent about 95% of the time every once in a while I'll get a little squeal but it's not a big deal because it's so rare to hear anything from these pads.
![Uhh...](https://www.clublexus.com/forums/images/smilies/1387914497.gif)
Hopefully what Matt said above will help out? with some time and a better transfer layer on the rear rotors hopefully it'll go away.
Mine are silent about 95% of the time every once in a while I'll get a little squeal but it's not a big deal because it's so rare to hear anything from these pads.
Last night, I came home from work and pulled into the garage. I then walked upstairs to say hello to my wife and she said, "I heard you pull in... not by the sound of your engine, but by the loud squealing of your brakes".
I've narrowed it down to the rears, so I'm going to take them apart tomorrow, clean them up, put them back together and see if that fixes the issue. We'll see.....
I really hope I can get this issue resolved because like I said, these pads are awesome from a performance standpoint!
The following users liked this post:
MileHIFcar (10-28-17)
#460
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I just installed the MX72's. Absolute great performance pad, but for some reason, mine squeal like a pig. I'm told that they are normally quiet, but not the case for me. I'm going to take the brakes apart this weekend, clean them real good and put them back together to see if it fixes the noise. We'll see. I really want them to quiet down because you truly can't beat the performance of these things!
I believe I was one of the first to purchase a set of these from Matt sometime in late '14 or early '15. Before I had the opportunity to install them, a (seriously) good friend was in need of brakes all around on his '11 F. We installed the MX-72's all around with a fresh set of Brembo's (or whomever actually manufactures them, I know the drill) purchased off eBay. This was the third set of OEM style F rotors of this manufacturer, purchased from the same seller.
All I can say is these pads have worn like iron (the front rotors have taken a bit of hit with approximately 28k on the set), are quiet as a church mouse, substantially less dust than the OEM pads, and definitely work well when there is some heat in them. I will not hesitate to buy another set sometime in the future when I get back to putting some miles on the F. As has been stated, cost is prohibitive compared to many other offerings, but I am pretty impressed with these.
#461
Intermediate
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Ended up having to go with stock Brembo rotors, as RR Racing isn't expecting their 2-piece fronts to be available for several weeks. Which leads me to my next question... posted this on the Brembo rotor thread as well but hoping some folks here might be more helpful:
My rear rotors have seen a couple track days, but only have maybe 20k on them, so I'd like to reuse them if possible with new pads. Is it really important that I have them turned, or will the new pads (Project Mu HC800) bed in fine as-is? I keep reading things about transfer layer - is this something I could get off with simple brake cleaner?
All that said, I have some meat left on the existing rear pads so was maybe going to keep them on a bit longer if possible as well... I know that might only increase the front bias already present in our cars, but would that necessarily be a safety issue tracking on a cool day? I have an event in December and another in March at CoTA. Thanks!
My rear rotors have seen a couple track days, but only have maybe 20k on them, so I'd like to reuse them if possible with new pads. Is it really important that I have them turned, or will the new pads (Project Mu HC800) bed in fine as-is? I keep reading things about transfer layer - is this something I could get off with simple brake cleaner?
All that said, I have some meat left on the existing rear pads so was maybe going to keep them on a bit longer if possible as well... I know that might only increase the front bias already present in our cars, but would that necessarily be a safety issue tracking on a cool day? I have an event in December and another in March at CoTA. Thanks!
#462
Lexus Champion
iTrader: (9)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
^^^^There is no good reason for resurfacing rotors unless they have developed high spots. If the rotors measure OK and the minimum thickness of .26mm is exceeded and they are smooth and true than you are golden. However, with track days, the drilled holes may have developed cracks. Check for cracks and if they have appeared the rotors need to be replaced. But, cracks on the rear rotors are rare, much more common on the drilled fronts. Which is why my fronts are slotted.
The new PMs will bed-in just fine.
Lou
The new PMs will bed-in just fine.
Lou
The following users liked this post:
Leander311 (11-20-17)
#463
Tech Info Resource
![](https://www.clublexus.com/forums/images/ranks/rank-smod2.gif)
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
My rear rotors lasted 120k miles and a half dozen track weekends with Carbotech XP10s in them. The rear rotors never get substantially hot. Ever. I've been through 5 sets of front rotors, and mostly for cracking, not for thickness. Currently on Raybestos, and there is no substantive difference between them and genuine Lexus rotors.
The following users liked this post:
Leander311 (11-20-17)
#465
Tech Info Resource
![](https://www.clublexus.com/forums/images/ranks/rank-smod2.gif)
iTrader: (2)