My Lexus IS-F now in the 11's (All Motor)!!!
#46
Tech Info Resource
iTrader: (2)
Congrats James! We need to try some other stuff now...
#51
Lead Lap
iTrader: (8)
Join Date: Oct 2010
Location: Texas
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
Oh ok, I just thought I read somewhere someone had some pretty decent gains or it may have been mixed with headers also. I know if it was promising Id be all over it. I think someone here is actually selling a core set as well.
Last edited by Mitch08ISF; 11-02-10 at 10:21 AM.
#55
Tech Info Resource
iTrader: (2)
This is more along the lines of what I was thinking follows next. Unless I can get a used engine cheap to find some really useful gains like lightening the crank, putting in oil scrapers, and doing some cylinder head work.
#57
Tech Info Resource
iTrader: (2)
It' a crap shoot. I usually like to add lift with relatively stock timings for street use, but without knowing how the ports flow, it's difficult to say if more lift will be good or not. If the heads are coming off, then all this can be measured, but without doing the homework on the ports and how they flow, changing the cams is just guesswork.
#58
Pole Position
iTrader: (4)
Join Date: May 2009
Location: PA
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
i am very interested because im up in the air with a SC kit, but i would like to keep the car all motor....i have intake and exhaust and am getting the intake manifold and throttle body and headers...but maybe cams....does anyone know the specs on our cams?
#59
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
It' a crap shoot. I usually like to add lift with relatively stock timings for street use, but without knowing how the ports flow, it's difficult to say if more lift will be good or not. If the heads are coming off, then all this can be measured, but without doing the homework on the ports and how they flow, changing the cams is just guesswork.
Joe Z