PPE Headers
#18
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Yeah I just read all 3 pages of the linked thread. I cant say I noticed the flange issues on mine and I was actually impressed with the craftsmanship of my set. I noticed the collector was not top notch, but I also have high standards due to T1 race development spending countless hours building me a full race header for my 700whp Honda K series motor. I think both companies products look good but PPE hands down has the better collector. I had a cast turbo manifold back in the day sent to jet hot for coating for a 4cyl race car and it was in the same condition after 4 yrs of use daily driving. So the whole ceramic argument in that thread is pointless. The flange on the header does matter to a certain degree, but I think we all want more power from the F and want a reliable company to do it or companies so far we have that. Cant wait to see the dyno's for the PPE!!!
Just curious, what are the PPE's made of? I dont care either way as you can tell from the linked thread
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
#20
Lexus Test Driver
iTrader: (1)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
As planned, went to PPE this morning and a pre header installation dyno and left my F off for the header install. Guys, the PPE header is gorgeous, the workmanship was outstanding
I really can't say enough good things about what I saw. Maybe these picts will do the talking. IMHO, these are the ones worth waiting for. PPE is planning a Group Buy when the first batch is released. Mine will be on next week
Lou
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
Lou
I may have to take a drive over to Arizona and check those out when you get them installed, unless you would like to meet us at the historic sportscar race April 9th at Chuckwalla raceway near Desert Center.
http://www.hsrwestrace.com/HSR_West/Welcome.html
#21
Lexus Champion
Join Date: Jun 2007
Location: Aventura, Florida
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Because you know what it takes to build a functional street car that makes good power, i know you'll understand me when i say it wasnt worth the risk. If i were able to swap the headers easily i would have considered the Sikky product more strongly.But with an expected install time in the 8 hour range, I honestly cant deal with any problems. Having my car in and out of a shop to fix a quality issue is something that i try my best to avoid.
I had this problem with one of our Articulating Cat Earth Movers during the main excavation phase of a 4 seasons marina community. I nearly missed a deadline after having the machine down for 48hours.
Ill be keeping an eye on what people think of the PPE headers once they are shipped.
I had this problem with one of our Articulating Cat Earth Movers during the main excavation phase of a 4 seasons marina community. I nearly missed a deadline after having the machine down for 48hours.
Ill be keeping an eye on what people think of the PPE headers once they are shipped.
Yeah I just read all 3 pages of the linked thread. I cant say I noticed the flange issues on mine and I was actually impressed with the craftsmanship of my set. I noticed the collector was not top notch, but I also have high standards due to T1 race development spending countless hours building me a full race header for my 700whp Honda K series motor. I think both companies products look good but PPE hands down has the better collector. I had a cast turbo manifold back in the day sent to jet hot for coating for a 4cyl race car and it was in the same condition after 4 yrs of use daily driving. So the whole ceramic argument in that thread is pointless. The flange on the header does matter to a certain degree, but I think we all want more power from the F and want a reliable company to do it or companies so far we have that. Cant wait to see the dyno's for the PPE!!!
#24
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Status:
The headers are on.
Monday - To the alignment shop.
Tuesday - Configure & Fabricate High-Flow Cats. The new Cats will be bolted to the back of the header and welded into the headpipe. The next dyno is scheduled for Tuesday afternoon. Then if all goes according to plan, I drive her home.
Lou
The headers are on.
Monday - To the alignment shop.
Tuesday - Configure & Fabricate High-Flow Cats. The new Cats will be bolted to the back of the header and welded into the headpipe. The next dyno is scheduled for Tuesday afternoon. Then if all goes according to plan, I drive her home.
Lou
#26
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Status:
The headers are on.
Monday - To the alignment shop.
Tuesday - Configure & Fabricate High-Flow Cats. The new Cats will be bolted to the back of the header and welded into the headpipe. The next dyno is scheduled for Tuesday afternoon. Then if all goes according to plan, I drive her home.
Lou
The headers are on.
Monday - To the alignment shop.
Tuesday - Configure & Fabricate High-Flow Cats. The new Cats will be bolted to the back of the header and welded into the headpipe. The next dyno is scheduled for Tuesday afternoon. Then if all goes according to plan, I drive her home.
Lou
Thank you for your updates. Very informative and well written. Looking forward to dyno results, and hearing about your experience after having them on the car for a few weeks. I may just have to jump in on the group buy too...
Jim
#27
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
![Sad](https://www.clublexus.com/forums/images/smilies/sad.gif)
Lou
Last edited by flowrider; 03-27-11 at 10:04 AM.
#29
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
^^^^PPE carries Hi-Flow Cats in a variety of sizes:
http://www.ppeengineering-onlinestor...?categoryId=22
I'm putting on the 2.5" in/out.
Lou
http://www.ppeengineering-onlinestor...?categoryId=22
I'm putting on the 2.5" in/out.
Lou