ISS forged exhaust installed
#1
ISS forged exhaust installed
Sounds great. Real burly. Sikky headers getting added soon before the Kansas City Import Shoot Out on May 1st. I'm trying to go in there and dominate the all motor sport division. I need to do a little weight reduction though.
Full photo shoot coming soon. Just wanted to give everyone a little preview.
Side note, I hear a little rattling as if the exhaust is either hitting the bumper or the diff. I need to replace the O2 sensor that I stripped and butchered so I'll see if I need to fix something or replace a rubber hanger.
Full photo shoot coming soon. Just wanted to give everyone a little preview.
Side note, I hear a little rattling as if the exhaust is either hitting the bumper or the diff. I need to replace the O2 sensor that I stripped and butchered so I'll see if I need to fix something or replace a rubber hanger.
#7
Pole Position
iTrader: (9)
Mine would rattle off of the rear cross member on bumps on one side because there was very little clearance. I just took an old piece of rubber intake tubing, cut it in half and put it around the exhaust with some zip ties and it doesn't make that metal to metal contact anymore. Maybe yours is doing the same, but I have one of the first run versions. Anyway, shouldn't be hard to figure out when you get under it.
Trending Topics
#8
Figured it out, one of the rubber hangers wasn't flush against the **** of the metal hanger so it wasn't maximizing the stiffness and length of the rubber hanger. Fixed and didn't hear any tapping against the bumper.
Mine would rattle off of the rear cross member on bumps on one side because there was very little clearance. I just took an old piece of rubber intake tubing, cut it in half and put it around the exhaust with some zip ties and it doesn't make that metal to metal contact anymore. Maybe yours is doing the same, but I have one of the first run versions. Anyway, shouldn't be hard to figure out when you get under it.