MachV Dyno day results for 3 IS-F's
#1
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
MachV held a Dyno meet today and the first three cars were all IS-F's! CL members TGUI, DS2K and myself were there with various mods as shown below. ![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
All runs were done in 6th gear (Manual Sport Mode)
TGUI-Stock
DS2K- JoeZ intake, PTS JoeZ exhaust with stock mufflers, K&N drop-in filter
caymandive- SIKKY Headers, Borla exhaust
Top runs for TGUI, DS2K and myself overlaid.
Based on the results I suspect DS2K's oiled K&N filter is affecting his MAF.![Sad](https://www.clublexus.com/forums/images/smilies/sad.gif)
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/AllFinal-1.jpg)
TGUI's stock run last year with 3500 miles on the odometer compared to today with over 10k miles. Talk about engine break-in!![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/StocknewvsStockbrokein2Final-1.jpg)
My best run today overlaid with my previous best. Car is running strong!![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/BorlaexhaustSikkyHeadersFINAL.jpg)
My runs from today combined. The 403whp on this stingy dynojet is no fluke.![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/MycombinedrunsFinal.jpg)
TGUI's bone stock IS-F vs Header/Exhaust IS-F
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/Modvsstock2Final.jpg)
Some videos from today:
My 403whp Run
TGUI's stock IS-F (365whp and 349tq)
DS2K's modified IS-F (364whp and 346tq)
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
All runs were done in 6th gear (Manual Sport Mode)
TGUI-Stock
DS2K- JoeZ intake, PTS JoeZ exhaust with stock mufflers, K&N drop-in filter
caymandive- SIKKY Headers, Borla exhaust
Top runs for TGUI, DS2K and myself overlaid.
Based on the results I suspect DS2K's oiled K&N filter is affecting his MAF.
![Sad](https://www.clublexus.com/forums/images/smilies/sad.gif)
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/AllFinal-1.jpg)
TGUI's stock run last year with 3500 miles on the odometer compared to today with over 10k miles. Talk about engine break-in!
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/StocknewvsStockbrokein2Final-1.jpg)
My best run today overlaid with my previous best. Car is running strong!
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/BorlaexhaustSikkyHeadersFINAL.jpg)
My runs from today combined. The 403whp on this stingy dynojet is no fluke.
![Stick Out Tongue](https://www.clublexus.com/forums/images/smilies/tongue.gif)
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/MycombinedrunsFinal.jpg)
TGUI's bone stock IS-F vs Header/Exhaust IS-F
![](http://i123.photobucket.com/albums/o304/caymandiver75/Misc/IS-F/Dyno/Modvsstock2Final.jpg)
Some videos from today:
My 403whp Run
TGUI's stock IS-F (365whp and 349tq)
DS2K's modified IS-F (364whp and 346tq)
Last edited by caymandive; 09-19-13 at 06:26 PM. Reason: Nicer videos added
#3
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Hey, Caymandive. Thanks for the informative data. Must have been a blast to spend time with other f owners and testing the cars out. Just curious though, what made you switch from your original exhaust to the Borla exhaust? Congrats on your numbers too.
Edit: Never mind, I just finished reading your reasoning on your other post.
Edit: Never mind, I just finished reading your reasoning on your other post.
Last edited by zojirushi; 10-01-11 at 10:31 PM.
Trending Topics
#9
Lexus Test Driver
Join Date: Aug 2009
Location: Middle East
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
no offence but not gains with joez exhaust + intake is normal. I dynoed 365 stock and 366 with joez exhaust/intake.
Last edited by Rider; 10-02-11 at 07:58 AM.
#10
#11
Lead Lap
iTrader: (1)
Join Date: Aug 2010
Location: Honeoye, NY
Posts: 426
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Interesting results - thanks for sharing.
I suspect that there could have been some sort of change in the dyno. It shows a 33HP increase in the stock F and 17HP your F with the same headers and different exhausts.
I don't think that engine break in will give a 10% increase. I don't think that going from a JoeZ to a Borla exhaust will give you an additional 17HP either. Granted there may be a increase but those numbers seem to be a little high to me.
The charts do show the mid-range improvements gained from the headers. That's golden for a street driven car and should be at the top of the mod list.
I suspect that there could have been some sort of change in the dyno. It shows a 33HP increase in the stock F and 17HP your F with the same headers and different exhausts.
I don't think that engine break in will give a 10% increase. I don't think that going from a JoeZ to a Borla exhaust will give you an additional 17HP either. Granted there may be a increase but those numbers seem to be a little high to me.
The charts do show the mid-range improvements gained from the headers. That's golden for a street driven car and should be at the top of the mod list.
#12
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Interesting results - thanks for sharing.
I suspect that there could have been some sort of change in the dyno. It shows a 33HP increase in the stock F and 17HP your F with the same headers and different exhausts.
I don't think that engine break in will give a 10% increase. I don't think that going from a JoeZ to a Borla exhaust will give you an additional 17HP either. Granted there may be a increase but those numbers seem to be a little high to me.
The charts do show the mid-range improvements gained from the headers. That's golden for a street driven car and should be at the top of the mod list.
I suspect that there could have been some sort of change in the dyno. It shows a 33HP increase in the stock F and 17HP your F with the same headers and different exhausts.
I don't think that engine break in will give a 10% increase. I don't think that going from a JoeZ to a Borla exhaust will give you an additional 17HP either. Granted there may be a increase but those numbers seem to be a little high to me.
The charts do show the mid-range improvements gained from the headers. That's golden for a street driven car and should be at the top of the mod list.
FWIW, all other car models present at the dyno day were showing spot on numbers for their modifications, as JoeZ seems to be implying calibration issues. This dyno remains a heart breaker of sorts.
#13
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
![Exclamation](https://www.clublexus.com/forums/images/icons/icon4.gif)
^^ Maybe a couple of documentated cases... But we have dozens or more independent dynos with IS-F owners showing their expected gains across the US and in Europe as well.
But I can assure you we have ZERO control over issues with other aftermarket parts used, dyno shop conditions and variables or worst of all possible issues with an OEM car/engine.. These issues are NOT related to our parts what so ever.
These parts have been dyno proven over and over again... Even by "caymandive" himself..!
Below is an example of a K&N Dyno issue with member "timeToy" and his IS-F from over 2 years ago.
"timeToy" experienced a 20 rwhp loss or NO GAIN due to a K&N drop in filter he installed and dyno’d at the same time he installed the PTS- JoeZ Ehxuast.
He actually even LOST -4 rwhp.
Unfortunately, he edited his first post after we helped him correct the issue over the phone and diagnose the true issue being the filter for him.
He also updated his original post each time he progressed with additional mods or additional dynos.
He removed the oiled filter, cleaned his MAF Sensor and reset the ecu. Then drove a good amount of miles and amazingly within the same week he got back his anticipated 20 rwhp, once he went back for the re-dyno.
I wish he would have keep that original post info for all to see. While posting his progress along the way within the thread.
But here is the dyno to show his documentated issue.
All of these runs were performed with the Stock Intake Pipe:
Blue = IS-F Baseline Bone stock
Red = IS-F w/PTS Exhaust and K&N Drop in Filter
Green = IS-F w/PTS Exhaust and OEM Drop in Filter (MAF Sensor was also cleaned)
![](https://www.clublexus.com/gallery/data/500/timeToy_IS-F_K_NIssue.png)
Regards,
~ Joe Z
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
Last edited by Joe Z; 10-02-11 at 04:13 PM. Reason: added: "cleaned his MAF Sensor"
#14
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Interesting results - thanks for sharing.
I suspect that there could have been some sort of change in the dyno. It shows a 33HP increase in the stock F and 17HP your F with the same headers and different exhausts.
I don't think that engine break in will give a 10% increase. I don't think that going from a JoeZ to a Borla exhaust will give you an additional 17HP either. Granted there may be a increase but those numbers seem to be a little high to me.
The charts do show the mid-range improvements gained from the headers. That's golden for a street driven car and should be at the top of the mod list.
I suspect that there could have been some sort of change in the dyno. It shows a 33HP increase in the stock F and 17HP your F with the same headers and different exhausts.
I don't think that engine break in will give a 10% increase. I don't think that going from a JoeZ to a Borla exhaust will give you an additional 17HP either. Granted there may be a increase but those numbers seem to be a little high to me.
The charts do show the mid-range improvements gained from the headers. That's golden for a street driven car and should be at the top of the mod list.
#15
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Interesting results - thanks for sharing.
I suspect that there could have been some sort of change in the dyno. It shows a 33HP increase in the stock F and 17HP your F with the same headers and different exhausts.
I don't think that engine break in will give a 10% increase. I don't think that going from a JoeZ to a Borla exhaust will give you an additional 17HP either. Granted there may be a increase but those numbers seem to be a little high to me.
The charts do show the mid-range improvements gained from the headers. That's golden for a street driven car and should be at the top of the mod list.
I suspect that there could have been some sort of change in the dyno. It shows a 33HP increase in the stock F and 17HP your F with the same headers and different exhausts.
I don't think that engine break in will give a 10% increase. I don't think that going from a JoeZ to a Borla exhaust will give you an additional 17HP either. Granted there may be a increase but those numbers seem to be a little high to me.
The charts do show the mid-range improvements gained from the headers. That's golden for a street driven car and should be at the top of the mod list.
I agree you can not conclude a broke-in motor will gain 33hp, but I'm sure he probably picked up at least 15hp and the rest can probably be attributed to the dyno day differences. As for what could be interpreted as a 17hp gain for the Borla exhaust over the PTS JoeZ I too agree that you won't find much if any difference in power as I mention in my dyno thread last week with the Dynapack results. Based on experience I'm almost willing to say the Dynapack is more consistent than the dynojet in terms of SAE correction. I remember last year before headers I had 371whp on the Dynojet. A year later with same mods a few runs were made for a new pre-header baseline and I could only hit 350ish whp. I knew the car wasn't making less power so it could only be attributed to how the dyno was reading on those particular days.
In summary trying to compare dyno results for differing days is completely unreliable. Want to know how your car is running? Compare results on the same day be it with your own car or against a group of same cars as we did at this dyno meet.