Like everything... but the wheels.

The stock wheels made the car look more "rich"

 

Very nice. I love the G2's, maybe a more aggressive offset or less wheel gap would help.
No need for 20s... Stay performance oriented.


Just an idea but seen the G2 Type 2's?

 

Thanks for all the comments!! Wow, I am really suprised that many members are not digging the VR G2...To be honest they are one of my fav JDM wheels.

I think maybe they are not aggressive enough ? I know I am finding a solution esp. the front.

Don't get me wrong, the polished blade stockers are also great, I was going to get a different look with less spokes G2. Again, personal preference right

I picked VR G2 for same top built quality (forged as the Stock BBS), a bit lighter (3 lbs lighter per corner), a bit wider (8.5F, 9.5R), a bit easier to wash and clean...

Ya, I love how 20" G2 looks so hot on T-Rex06's F, but I decided to stick with 19" for better handling performance; plus the road condition here is not that friendly for this heavy F riding on 20"...

^ Nice, ya I thought about switching over because Type-2 G2 offer better offsets...

Mine are 19x8.5 ET45 Front and 9.5 ET45 Rear. I was supposed to get 8.5 ET35 front, but back then they are out of stock and need to wait at least 3 months...

Lately I am thinking maybe try 19x9.5 ET45 all around but I am not sure about the front tires size and the handling factor...

- Link

 

The TOM's CF kit looks great! Not a fan of the wheels though, needs a more aggressive setup, but to each their own!

 

I can see where you are going with the wheels, IMO , I would have at least gone wider.
Maybe a new grill with the emblem deleted, idk, maybe its your license plate, I mean for god sake, its an ISF, and it should remind me of a Infinity G series coupe, either way, very classy, and well executed, Toms looks like it was a factory option, keep it up

 

I'm running the VR G2 Type 2's

9.5 in front and 10.5 in rear. Lowered, with Megan Camber Kit. Fender is rolled in back.

 

Mind to share your offsets and tires sizes?

 

+1 some pics as well? Sounds nice. I am a true TE37 fanboy though, I buy the wheels for every car I own lol. I didnt know we could fit the Megan Racing Camber Kit.

Again, nice car Linkseal. Its a clean, simple setup.

 

Once i get back from Hawaii. Getting on an airplane as i type this.

 

yo F is SICK!

 

I like it, I think the wheels are a step in the right direction. My personal favorite is the GTS though but these set the car apart from the others nicely as well. Nice!!!

 

I like your stock rims over this... Those VOlk look too plain and simple

 

^ Really that bad? lol, I am more like a "Simple is nice" type guy...

 

TE37 are on the top of my list too, but need to get at least ET22 for the correct look

I am also waiting info for Megan racing camber kit!

 

Sorry forgot to mention some settings/specs upon few PMs requested...



Ride Height - (1 finger gap between tire and fender all around)
Front: 655 mm (cannot go lower due to the TOM'S side steps)
Rear: 650 mm

KW V3 Settings - (KW preset settings now)
Front: 6 clicks open (Will try 4 or 5 clicks since F is heavy on nose)
Rear: 9 clicks open

Wheels - (VR G2 Type-1)
Front: 19x8.5 ET45 - 20.4lbs
Rear: 19x9.5 ET45 - 21.4lbs

Tires - (Michelin PSS)
Front: 245/3519
Rear: 275/35/19

Camber - (-1.5 all around)

Corner Weight - Total 3733 lb (Full tank gas, spare tire deleted)
Front: 1039 lb, 1024 lb
Rear: 834 lb, 836 lb

No rubbing no fender works so far...

- Link