Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Steering and Suspension
- How to Install a Lowering Kit
Step by step instructions for do-it-yourself repairs
Browse all: Steering and Suspension
ISF front lowering kit
#1
Moderator
Thread Starter
ISF front lowering kit
I have 2011 F and happy with ride quality but would like to have front end dropped VIP Autosalon offers this lowering kit that repalces control arm bolts. Any opinoins on this kit or has anyone used this set up yet. Pros and cons of using set up like this. To our resident F guru's Lobuxracer and Lowrideraz would love to here your opinion on this kit thanks guys.
THE SUPER NOW FRONT LOWERING KIT ALLOWS YOU TO KEEP YOU FACTORY SHOCK AND SPRINGS. THE KIT ALLOWS YOU TO LOWER YOUR FRONT SUSPENSION BY REPLACING A COUPLE CONTROL ARM BOLTS. YOU WILL HAVE TWO AVAILABLE ADJUSTMENTS, 15MM AND 25MM LOWERING.
THE SUPER NOW FRONT LOWERING KIT ALLOWS YOU TO KEEP YOU FACTORY SHOCK AND SPRINGS. THE KIT ALLOWS YOU TO LOWER YOUR FRONT SUSPENSION BY REPLACING A COUPLE CONTROL ARM BOLTS. YOU WILL HAVE TWO AVAILABLE ADJUSTMENTS, 15MM AND 25MM LOWERING.
Last edited by Weapon F; 01-19-12 at 05:11 PM.
#2
Tech Info Resource
iTrader: (2)
It works. How well it works is another question. It might be awesome, and it might not. Without running the new camber curves through an analysis with a suspension modeling tool, you don't know for sure what the outcome will be.
Odds are, it will raise the roll center and lengthen the roll couple because the lower control arm will be lower at the outboard point, but again, without knowing for sure what it impacted, it's just a guess. It wouldn't be too hard to install and test.
More importantly - most street drivers will never know the difference. Measuring the difference is a timed course and watch thing.
Odds are, it will raise the roll center and lengthen the roll couple because the lower control arm will be lower at the outboard point, but again, without knowing for sure what it impacted, it's just a guess. It wouldn't be too hard to install and test.
More importantly - most street drivers will never know the difference. Measuring the difference is a timed course and watch thing.
The following users liked this post:
CMSISF (06-12-21)
#3
Moderator
Thread Starter
It works. How well it works is another question. It might be awesome, and it might not. Without running the new camber curves through an analysis with a suspension modeling tool, you don't know for sure what the outcome will be.
Odds are, it will raise the roll center and lengthen the roll couple because the lower control arm will be lower at the outboard point, but again, without knowing for sure what it impacted, it's just a guess. It wouldn't be too hard to install and test.
More importantly - most street drivers will never know the difference. Measuring the difference is a timed course and watch thing.
Odds are, it will raise the roll center and lengthen the roll couple because the lower control arm will be lower at the outboard point, but again, without knowing for sure what it impacted, it's just a guess. It wouldn't be too hard to install and test.
More importantly - most street drivers will never know the difference. Measuring the difference is a timed course and watch thing.
#4
Tech Info Resource
iTrader: (2)
Yeah, the install is easy. Just be sure to check the toe after you install. It might change a little bit, and we all know a little bit can make a big difference with the 2IS.
Trending Topics
#8
Pit Crew
iTrader: (2)
Join Date: Nov 2011
Location: ayrshire
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone fitted these or have a picture of where they go?
I like the idea off them as I think they got the suspension right but just a little high on the front and I don't track my f so they are good enough for me
I like the idea off them as I think they got the suspension right but just a little high on the front and I don't track my f so they are good enough for me
#11
I am interested in purchasing this but I am also curious as to whether or not anyone else has...It says you could choose which setting, 25mm or 15 mm. If you are planning on dropping an inch, id just buy lowering springs.. now if you are looking for about a half inch drop, this may not be a bad imo. I am just curious as to whether or not this would affect dampening rates, etc.
#15
Lead Lap
iTrader: (6)
My opinion comes down to what the camber is on the fronts once these are installed. The prevailing problem with springs is that once they're on, your front wheels will be at roughly around -2 degrees with no ability to adjust. You're sacrificing contact patch and quicker tire wear unless you purchase correcting camber plates. So yes, you can lower it for less money but these may be a better option depending on what the camber ends up being.