Hide The Plate
02-19-12 | 08:25 PM
#16
Lead Lap
Joined: Sep 2010
Posts: 477
Likes: 0
From: TX
I have had mine for a year and a half. I have the manual version and I have scraped a couple times and it has held up well. My car is not lowered but the way the enter/ exit lots around here are fairly drastic so under normal circumstances, it should hold up well. My thought was if I had the powered version to see if I could rig it up in such a way that when you start the car, it flips up and as soon as you turn off the car, it flips underneath.
02-19-12 | 08:31 PM
#17
Lead Lap
Joined: Feb 2012
Posts: 552
Likes: 2
From: Bay Area/ Valley/ So. Cal
So the story behind this goes... I got pulled over on my way to school. Turns out that this cop is notorious for pulling people over for not having a front plate. He said he would give me a ticket if he saw me driving without a front plate again.... Challenge ACCEPTED.
So i am driving with my plate down until i get pulled again hopefully by the same cop and when i am stopped i am going to raise the plate. The module is wireless and its a little thing you can put on your key chain. It works at about 15-20ft away. So when he says why don't you have a front plate i am going to tell him to go look at it. Then i will proceeded to complain to that city that I was pulled over for no reason. Don't mess with The F
So i am driving with my plate down until i get pulled again hopefully by the same cop and when i am stopped i am going to raise the plate. The module is wireless and its a little thing you can put on your key chain. It works at about 15-20ft away. So when he says why don't you have a front plate i am going to tell him to go look at it. Then i will proceeded to complain to that city that I was pulled over for no reason. Don't mess with The F
02-20-12 | 11:57 AM
#19
Thread Starter
Lexus Test Driver
Joined: May 2011
Posts: 1,054
Likes: 2
From: va
02-20-12 | 12:26 PM
#20
Haha so true. I luckily don't need a front plate but always wondering how anyone with a lowered car would be able to use that without it geting ripped off.
02-21-12 | 03:48 PM
#22
Rookie
Joined: Jan 2012
Posts: 50
Likes: 3
From: CA
Definitely getting this when the time comes to put a plate. I've specifically requested that no holes get drilled on my front bumper so that I can get a custom mount.
Please let us know how it's working. Any updated review would be appreciated.
Please let us know how it's working. Any updated review would be appreciated.
Last edited by caco666; 02-21-12 at 06:22 PM.
02-21-12 | 05:15 PM
#23
Thread Starter
Lexus Test Driver
Joined: May 2011
Posts: 1,054
Likes: 2
From: va
So now the mount has been on for a few days now and everything is working great. The remote actually works from about 40 to 50 feet away. Its a pretty sweet mount and everyone loves it and thinks its so cool.
To find the web site to order it off of just google search Hide The Plate. On the web site there will be two versions the motorized one, which i have, and a manual one. I would highly recommend the motorized one just so you can screw with people and it looks cool.
I have scraped it on the ground one time on purpose to see how it would hold up and all is good. If you mount it properly I don't see any possibility of the thing coming off. However, Im sure someone on here will find a way to prove me wrong.
To find the web site to order it off of just google search Hide The Plate. On the web site there will be two versions the motorized one, which i have, and a manual one. I would highly recommend the motorized one just so you can screw with people and it looks cool.
I have scraped it on the ground one time on purpose to see how it would hold up and all is good. If you mount it properly I don't see any possibility of the thing coming off. However, Im sure someone on here will find a way to prove me wrong.
02-21-12 | 07:51 PM
#27
Thread Starter
Lexus Test Driver
Joined: May 2011
Posts: 1,054
Likes: 2
From: va
The motorized version is powered by what looks like an rc car electric engine but its waterproof and all the good stuff. The install is very easy if you want to see how i did it ill put up pictures.
02-21-12 | 09:48 PM
#29
Driver
Joined: Nov 2011
Posts: 157
Likes: 0
From: New York
Ive had this plate sitting in my trunk and I have been waiting to get this on already.. I was always worried how it would just scrape off but I think its about time I need to get this on.. It is def james bond material