Pic Request: ISF with CF splitters
06-05-13, 08:55 AM
#136
I just ordered this to evaluate. Will post impressions and see if its worth it. details on fitment quality etc.
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
06-05-13, 10:31 AM
#137
Instructor
sweet. I've been waiting for someone to get this for month's.
06-05-13, 01:13 PM
#138
Lexus Test Driver
06-05-13, 08:20 PM
#139
Lexus Champion
06-05-13, 08:53 PM
#140
If all is good after your evaluations, would you be considering adding it onto your line of things you carry for the F? Reason I ask cause you are pretty much my go to source if other company's give me the run arounds about shipping stuff to Guam. I look forward to see what your impressions are on the product, thanks!
Mike
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
08-24-13, 06:19 PM
#141
Just installed my Auto Tecknic splitters.
Word of caution if you plan on pre-drilling the holes for bolts; my drill bit nicked the windshield washer fluid hose that feeds the headlight washers (it is clipped to the inside of the bumper skin). It was a very wet and messy install for me.
Word of caution if you plan on pre-drilling the holes for bolts; my drill bit nicked the windshield washer fluid hose that feeds the headlight washers (it is clipped to the inside of the bumper skin). It was a very wet and messy install for me.
Last edited by Vervish; 08-24-13 at 06:35 PM.
08-24-13, 10:15 PM
#142
So I just wanted to follow up on the AF front splitter fitment. It was pretty bad...I mean if you want to have both sides on. Each side would fit perfect but the splitter obviously shrank in the mold leaving neither side able to fit at the same time. Worse yet was AF customer service. Still trying to get our money back and they stopped responding to our emails. This is why I do this, too many companies not willing to listen to feedback and fix their products. That is what we try to do and only sell products that we feel the company behind them is worth a damn.
__________________
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
Redefining Lexus Aftermarket Parts Since 2001
-- We are your Lexus suspension experts--
BCR - KW - PENSKE - OHLINS - HKS - GREDDY - STANCEPARTS
Links - Arms - SuperPro Poly Bushings - Solid Bearing Conversions - Motor Mounts
RB BBK's and 2P Rotors, G-Loc pads, Radium Fuel Systems
Custom Fabrication Design and Machining - Industrial 3D Printing - Laser Cutting
2018 USTCC Sportsman Class Champions - 2018 NASA ST5 National Champions
08-25-13, 01:03 AM
#143
Lexus Test Driver
^ Thanks for sticking your neck out for us FIGS and checking into the product. By any chance you would be carrying any other aero products... maybe Tom's? What about an exhaust option? Just checking, thanks for all you do for the community bro!
09-05-13, 06:32 AM
#144
Driver School Candidate
Join Date: Jul 2013
Location: georgia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
those splitters do look very nice but have anyone tried to modify their bumper to add like a lip made from scratch? i am thinking of making a custom bumper for my isf, just trying to see some ideas. i really like the wald but its not in my budget
11-15-13, 04:49 PM
#146
Lexus Test Driver
On the auto kinetic front lips I had a failure last week. I was making a high speed run(quicker than you would hit in a 1/4 mile) and had one fly off the car. There were seven screws holding it in place.
11-15-13, 06:13 PM
#148
Lexus Test Driver
They included lock tight on all the screws. I went back and was able to find the splitter and it looked like this. I am debating what to do now…. Get a full lip or just get another set or if anyone has a spare passenger side one that would be epic!!
