When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Taken from the paint shop straight to my friend at ETLgarage to install the coilovers and suspension arms and f-sport swaybar. Wrong day to work on cars around SoCal!! It's 105+ outside!!!
Was any double sided tape required for the instal or it fit very snug?
It was pretty snug, but some members opted to drill through the bumper where the reflectors are located. I just didn't want to drill it period in case I feel like I want to change up the look later on. I just used double sided tape and two small screws on the underside of the diffuser near the curved ends.
Was any double sided tape required for the instal or it fit very snug?
3m was used on mines for the diffuser it snugs to the bumper but the corners where the exhaust tip u might want to apply pressure to it for a long time so it stays that way. I have to redo mines but will leave it on for a day and have something apply pressure towards it and just leave it there the whole day. only thing is I need to find time to do it.
Very cool. I hadn't seen anyone with that yet. Must certainly help over speed bumps and the like. Did you choose to have the control switch installed or are you using the remote to increase/decrease the height?
06-29-13, 10:56 PM
