Pic of your IS-F - RIGHT NOW!
#7231
Intermediate
#7232
Pole Position
Just finished fitting this Tom's style rear diffuser. I used a genuine Toyota sideskirt weather strip which I ordered from Japan to give it more of a factory finish. The color of the diffuser is Lexus Smokey Granite Mica (1G0), which goes nicely against the Matador Red.
#7233
Intermediate
Thanks man. Really happy with the way it came out. The weather stripping posed a problem in terms of getting the double sided tape to stick as the strip sticks to the back edge of the diffuser, so the tape had to be stacked 3 high to sit flush with it and stick to the bumper. The sides kept unsticking when the exhaust got hot after a few test pulls to make sure it wouldn't fly off, so we ended up taking it off completely and using urethane on the sides instead. Now it's nice and solid and there's no chance of any radiant heat making it peel off.
The following 2 users liked this post by DownUnder:
jsmithtpa (03-15-21),
MileHIFcar (03-07-21)
#7234
Moderator
My previous owner used gasket maker on his and it ate the paint. I’m about to put it back on.
The following 3 users liked this post by MikeyK02:
The following 3 users liked this post by B Dot:
#7238
Lexus Fanatic
iTrader: (10)
Join Date: Nov 2004
Location: Under an IS F since 2008
Posts: 13,441
Received 1,064 Likes
on
586 Posts
Thanks! Here's the link: https://www.amayama.com/en/part/toyota/7692144060c0
It might be, or something like this Moulding
See link he posted - looks available over the counter in the USA
Joe Z
The following 2 users liked this post by Joe Z:
MileHIFcar (03-07-21),
Rickna (03-07-21)
The following users liked this post:
jsmithtpa (03-15-21)
#7241
Tech Info Resource
iTrader: (2)
76921-44060-C0 was only sold in Japan on the Toyota Ipsum. The part is not available outside of Japan easily.
#7245
Moderator