IS F (2008-2014) Discussion topics related to the IS F model

Pic of your IS-F - RIGHT NOW!

Thread Tools
 
Search this Thread
 
Old 02-13-23, 08:20 PM
  #7666  
TheNaeblis
Rookie
 
TheNaeblis's Avatar
 
Join Date: Nov 2021
Location: TN
Posts: 46
Received 48 Likes on 19 Posts
Default

Wasn't looking to well outside, but then the rain went away in the end.​


Last edited by TheNaeblis; 02-13-23 at 08:23 PM.
The following 7 users liked this post by TheNaeblis:
autovation (02-13-23), BS ISF (02-14-23), DownUnder (02-13-23), iH8RICERZ (02-14-23), MileHIFcar (02-13-23), Rickna (02-14-23), Vitveet (02-21-23) and 2 others liked this post. (Show less...)
Old 02-13-23, 08:40 PM
  #7667  
TheNaeblis
Rookie
 
TheNaeblis's Avatar
 
Join Date: Nov 2021
Location: TN
Posts: 46
Received 48 Likes on 19 Posts
Default

Originally Posted by DownUnder
Yep they are DOT and SAE approved (stamped on the bottom of the lens). They are really bright at night, about 10x brighter than Vlands I have had in the past on the 350's, which were also decently bright at the time. If anyone complains that these aren't bright enough then they either haven't had them aligned or have rocks in their head 🤣
Are they plug & play, or is there some splicing required? Any recommended vendors for them? I have Night Breaker Lasers in my HID housings and they are an improvement but they still aren't up to snuff with some of the lighting conditions I seem to run into even in the city at times so I'd been looking around a bit.
Old 02-13-23, 11:59 PM
  #7668  
DownUnder
Intermediate
 
DownUnder's Avatar
 
Join Date: Aug 2010
Location: New Zealand
Posts: 344
Received 796 Likes on 225 Posts
Default

Originally Posted by TheNaeblis
Are they plug & play, or is there some splicing required? Any recommended vendors for them? I have Night Breaker Lasers in my HID housings and they are an improvement but they still aren't up to snuff with some of the lighting conditions I seem to run into even in the city at times so I'd been looking around a bit.
They are plug and play. No splicing required. I genuinely don't think you would be disappointed with the light output. I am going to be going back to OEM facelift headlights soon, just because I like the original look and rarely drive at night, but if night driving was a regular thing I would never go back to stock.
Old 02-19-23, 08:37 PM
  #7669  
TallGoose
Rookie
 
TallGoose's Avatar
 
Join Date: Oct 2016
Location: Nevada
Posts: 30
Received 108 Likes on 18 Posts
Default

So close to that sub2 in buttonwillow! Not bad for my first time here though



The following 6 users liked this post by TallGoose:
BS ISF (02-20-23), Defratos (02-28-23), iH8RICERZ (02-21-23), JT2MA71 (02-20-23), Positron (02-21-23), Rickna (02-20-23) and 1 others liked this post. (Show less...)
Old 02-20-23, 11:51 AM
  #7670  
Cerevo
9th Gear
 
Cerevo's Avatar
 
Join Date: Jul 2020
Location: Ky
Posts: 9
Received 21 Likes on 5 Posts
Default

Hi, I just got my 2011 ISF this past weekend and in my 8 hour drive home I really enjoyed it. It's replacing my 2001 is300, and my 03 Evo. Still have the miata for rowing gears


Last edited by Cerevo; 02-20-23 at 11:53 AM. Reason: I uploaded a picture but its not showing up..
The following 6 users liked this post by Cerevo:
BS ISF (02-20-23), ChpEng (02-20-23), DK3Fiddy (02-20-23), iH8RICERZ (02-21-23), JT2MA71 (02-21-23), Rickna (02-20-23) and 1 others liked this post. (Show less...)
Old 02-20-23, 12:45 PM
  #7671  
Amre
Pit Crew
 
Amre's Avatar
 
Join Date: Jan 2009
Location: Texas
Posts: 101
Likes: 0
Received 2 Likes on 1 Post
Default

congrats @Cerevo ! was this one at the toyota store? just curious if they budged on the price.
Old 02-20-23, 12:55 PM
  #7672  
Cerevo
9th Gear
 
Cerevo's Avatar
 
Join Date: Jul 2020
Location: Ky
Posts: 9
Received 21 Likes on 5 Posts
Default

This was from Georgia, but no they really didnt want to budge on price and I didn't really want to pay what I did for it. However I justified it to myself because of the miles and it will probably be the last car I buy for at least 10 years.
The following users liked this post:
BS ISF (02-20-23)
Old 02-20-23, 10:06 PM
  #7673  
AyeBird
Pit Crew
 
AyeBird's Avatar
 
Join Date: May 2016
Location: California
Posts: 137
Received 95 Likes on 28 Posts
Default

I have a bad habit of washing my cars every week, regardless of whether I feel sick as hell (and I do) or if I don’t drive it often. I decided to try out a ceramic coating spray after the usual wash/decontamination. It might be hard to tell in pictures but, the car looks more shinier and reflective. I can’t wait to see water and dirt fall off of my F like nothing.







The following 8 users liked this post by AyeBird:
autovation (02-21-23), BS ISF (02-21-23), DK3Fiddy (02-20-23), iH8RICERZ (02-21-23), JT2MA71 (02-21-23), Lushman (02-21-23), msgs350 (02-21-23), Rickna (02-21-23) and 3 others liked this post. (Show less...)
Old 02-21-23, 11:15 AM
  #7674  
Positron
Pit Crew
 
Positron's Avatar
 
Join Date: Aug 2011
Location: CA
Posts: 123
Received 226 Likes on 71 Posts
Default

Golden hour at Sacramento Raceway




The following 10 users liked this post by Positron:
autovation (02-21-23), BS ISF (02-21-23), Cerevo (02-21-23), Defratos (03-18-23), iH8RICERZ (02-21-23), IronNam (02-21-23), Quadrphnia (02-23-23), Rickna (02-21-23), TallGoose (02-21-23), Toprawman (02-21-23) and 5 others liked this post. (Show less...)
Old 02-21-23, 05:22 PM
  #7675  
Cerevo
9th Gear
 
Cerevo's Avatar
 
Join Date: Jul 2020
Location: Ky
Posts: 9
Received 21 Likes on 5 Posts
Default

Originally Posted by TallGoose
So close to that sub2 in buttonwillow! Not bad for my first time here though

Can I ask, what spoiler is that, and do they make it in Carbon Fiber?
Old 02-22-23, 10:19 AM
  #7676  
Amre
Pit Crew
 
Amre's Avatar
 
Join Date: Jan 2009
Location: Texas
Posts: 101
Likes: 0
Received 2 Likes on 1 Post
Default

Originally Posted by Positron
Golden hour at Sacramento Raceway



beautiful car!!! what front lip is that?
The following 2 users liked this post by Amre:
Cerevo (02-27-23), Defratos (03-18-23)
Old 02-22-23, 08:16 PM
  #7677  
TallGoose
Rookie
 
TallGoose's Avatar
 
Join Date: Oct 2016
Location: Nevada
Posts: 30
Received 108 Likes on 18 Posts
Default

Originally Posted by Cerevo
Can I ask, what spoiler is that, and do they make it in Carbon Fiber?
SARD spoiler, carbon fiber twill weave
The following users liked this post:
Cerevo (02-24-23)
Old 02-27-23, 11:06 AM
  #7678  
SonicRob99
Pit Crew
 
SonicRob99's Avatar
 
Join Date: Jul 2014
Location: CO
Posts: 203
Received 428 Likes on 126 Posts
Default

Newtons Third Law: if you wash and detail your car, it will rain. She was shiny for almost 24 hrs!



The following 12 users liked this post by SonicRob99:
autovation (02-27-23), Bechtold (03-04-23), BS ISF (02-28-23), Cerevo (02-27-23), ChpEng (02-28-23), DK3Fiddy (02-27-23), DownUnder (02-27-23), iH8RICERZ (02-27-23), Lushman (02-28-23), MileHIFcar (02-27-23), Rickna (02-27-23), TallGoose (02-27-23) and 7 others liked this post. (Show less...)
Old 02-28-23, 07:25 PM
  #7679  
bakalag
Intermediate
 
bakalag's Avatar
 
Join Date: Feb 2013
Location: ca
Posts: 459
Received 431 Likes on 125 Posts
Default



The following 7 users liked this post by bakalag:
Bechtold (03-04-23), BS ISF (03-01-23), DownUnder (02-28-23), iH8RICERZ (03-02-23), Rickna (03-01-23), SonicRob99 (03-01-23), TallGoose (02-28-23) and 2 others liked this post. (Show less...)
Old 03-01-23, 07:06 AM
  #7680  
Cerevo
9th Gear
 
Cerevo's Avatar
 
Join Date: Jul 2020
Location: Ky
Posts: 9
Received 21 Likes on 5 Posts
Default


Drove it to office yesterday, terrible picture.
The following 3 users liked this post by Cerevo:
bakalag (03-01-23), BS ISF (03-01-23), Rickna (03-01-23)


Quick Reply: Pic of your IS-F - RIGHT NOW!



All times are GMT -7. The time now is 09:29 AM.