terrible quality of FXauto carbon fiber
#1
Registered User
Thread Starter
iTrader: (2)
Join Date: Apr 2012
Location: Tampa
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
So I waited over 3 weeks to get my orginal carbon fiber parts wrapped by FX Auto. I get the parts and notice the cupholder had a larger carbon weave then the rest of the kit and also the carbon was starting to seperate from the priginal part. I contacted FX about this. He said the cupholder was from the previous supplier in China they used, and that he will send me another cupholder with the same tight weave from the new Chinese supplier.
Today I get the new cupholder, and it has the nice tight weave to it. I go to take off the center console to install the new cupholder, and notice the entire rest of the 7-piece kit is also seperating....and to ad to that, the new cupholder is not as high as the rest of the carbon fiber, so now it sits about 1/4" too low. I advise all of you to check your pieces before too much time goes by, and also realize al this stuff is getting wrapped in China.
I should have gone with Carbon Fiber Elements in the beginning as they are cheaper, located in N.J., and I've had work done by them before and there is no shipping your parts off to China and waiting to get them back.
Center console left side:
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0890.jpg)
Center console right side:
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0889.jpg)
Notice the difference in cupholder thickness (you can also see the old cupholder from the different supplier starting to crack too):
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0891.jpg)
So to sum up, the old supplier wrapped these parts inferior as did the "new" supplier, and the parts don't line up. All this after waiting over three weeks for the parts!
Today I get the new cupholder, and it has the nice tight weave to it. I go to take off the center console to install the new cupholder, and notice the entire rest of the 7-piece kit is also seperating....and to ad to that, the new cupholder is not as high as the rest of the carbon fiber, so now it sits about 1/4" too low. I advise all of you to check your pieces before too much time goes by, and also realize al this stuff is getting wrapped in China.
I should have gone with Carbon Fiber Elements in the beginning as they are cheaper, located in N.J., and I've had work done by them before and there is no shipping your parts off to China and waiting to get them back.
Center console left side:
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0890.jpg)
Center console right side:
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0889.jpg)
Notice the difference in cupholder thickness (you can also see the old cupholder from the different supplier starting to crack too):
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0891.jpg)
So to sum up, the old supplier wrapped these parts inferior as did the "new" supplier, and the parts don't line up. All this after waiting over three weeks for the parts!
Last edited by MWhit02; 10-15-12 at 12:39 PM.
#3
Lexus Test Driver
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Terrible there.
Can I ask how much was the service? So we all can learn and try to figure out what an "average" price is, as sometimes pricing can be an indication. Thanks.
Can I ask how much was the service? So we all can learn and try to figure out what an "average" price is, as sometimes pricing can be an indication. Thanks.
#6
Lexus Test Driver
iTrader: (30)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Too bad u got the bad one, my fogs cover and rear console are from FXauto
never had any problem. Not made in China but in Singapore. Call Chris at FX auto he going to take of you. Just talked to him yesterday told him to order ISF OEM trunk spoiler made in black carbon fiber for me
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
![Smilie](https://www.clublexus.com/forums/images/smilies/smile.gif)
Trending Topics
#8
Registered User
Thread Starter
iTrader: (2)
Join Date: Apr 2012
Location: Tampa
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I would say I guess you get what you pay for, but in this case, I paid more for FXAuto o do the work than wht Carbon Fiber Elements would have charged me had I gone with them.
FXAuto is going to ship me new OEM pieces and a full refund as long as I send my Chinese pieces back to him, but if you knew what I went thru to get the carbon piecs i the first place
Last edited by MWhit02; 10-15-12 at 01:57 PM.
#10
Registered User
Thread Starter
iTrader: (2)
Join Date: Apr 2012
Location: Tampa
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
So FXAuto said if I send the back the defective pieces (all 7), they would refund my $575 and give me new OEM parts so that I could send those off to a different company to have wrapped in CF.
So here's what they send me:
4 brand new switch panels...and SOMEONES USED CENTERSOLE WHERE THE CUPHOLDER LID DOESNTLINE UP AND THE BACK OFTHE CENTER CONSOLE IS MISSING A RED PLASTIC THING THAT HOLDS THE CHROME FIRM ON THE FRONT SIDE.
I'll tell you, FXAuto just keeps on surprising me (not in a good way of course).
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0914.jpg)
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0911.jpg)
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0913.jpg)
So here's what they send me:
4 brand new switch panels...and SOMEONES USED CENTERSOLE WHERE THE CUPHOLDER LID DOESNTLINE UP AND THE BACK OFTHE CENTER CONSOLE IS MISSING A RED PLASTIC THING THAT HOLDS THE CHROME FIRM ON THE FRONT SIDE.
I'll tell you, FXAuto just keeps on surprising me (not in a good way of course).
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0914.jpg)
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0911.jpg)
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0913.jpg)
![](http://i890.photobucket.com/albums/ac106/slideways314314/IMG_0915-1.jpg)
#12
Registered User
Thread Starter
iTrader: (2)
Join Date: Apr 2012
Location: Tampa
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I never would have noticed the carbon fiber seperating from the pieces if I hadn't had to replace the cup holder lid. It wasn't anything you could see from sitting in the seat looking down. May want to check your stuff out.
#13
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Man, for Carbon Fiber wrapping needs, I would only deal with Tony at CFE. He's extremely talented, has great prices and awesome customer service. He did all my CF in my 370Z and it was all on-point. I'm not saying he's the only great CF artist out there but he's the Mobile 1 of CF wrapping
![Thumb Up](https://www.clublexus.com/forums/images/smilies/thumbsup.gif)